6Other Play Methods with MP3 filesTrack skip playPlays from the selected track through to the last trackon the disc.Plays from the selected track through to the last track inthe current album.Preparation: Put unit in stop mode.1 Select the desired track.2Album skip playYou can skip album to album.Plays from the first track of the selected album throughto the last track on the disc.Plays from the first track of the selected album throughto the last track in the current album.Press during play or stop mode to se-lect the desired album.When pressed while stoppedThe album number and the total number of tracks withinit appear on the display.Press [1/;] to start play from the first track in the album.Press [:] or [9] first to select another track to startplay.The letters such as F in the various illustrations refer to the descriptions in the “Location of Controls” section (see page 2).FGProgram playUp to 20 tracks can be entered in the programmed se-quence.Preparation: Put unit in stop mode.1 Select the desired album.2 Select the desired track.3 Register in sequence.(The indication “M” and the programmed se-quence appear on the display.)4 Repeat steps 1, 2 and 3 to programall the desired tracks.5∫ To program the same track in the se-quence more than once∫ After step 3, press [MEMORY] the desired numberof times.∫ If “ ” is displayed∫ No more tracks can be programmed.∫ To confirm the contents of the program∫ Press [MEMORY] while the disc is playing. (Thealbum and track numbers and their sequence ap-pear in order, one after the other.)∫ To delete the entire programmed se-quence∫ Press [∫].For your reference:≥If album mode was engaged, disc mode is engagedautomatically when you press [MEMORY].≥The random repeat play mode is canceled after steps1, 2 and 3.FAMEMORYGAlbum modeDisc modeAlbum modeDisc modeALBUMMODEDISPLAYALBUMALBUMJALBUMMODEDISPLAYALBUMALBUMJTRACKALBUMMP3M1RNDS-XBSAlbum number Number of tracksin album 1Repeat play/Random playPress during play or stop mode.The setting switches as shown below each time youpress the button.1-track repeat (1 `)( ----------------]One track is repeated. |v |All-track repeat (`) |All the tracks on the disc are repeated. |v |Random repeat (RND `) |The tracks on the disc play repeatedly |in random order. |v |Cancel (no indicator is shown) --------------}1-track repeat (1 `)( ----------------]One track is repeated. |v |All-track repeat (`) |All the tracks in the album are repeated.|v |Random repeat (RND `) |The tracks in the current album play |repeatedly in random order. |v |Cancel (no indicator is shown) --------------}When pressed during program playThe setting switches as shown below each time youpress the button.1-track repeat (1 ` M)(------------]One track is repeated. |v |Memory repeat (` M) |The programmed tracks are repeated. |v |Cancel (M) -------------------------------------------}Note!≥You can select the first track to play in random repeatplay by pressing [M ALBUM L] and [9] while thedisc is stopped.≥Tracks in an album or disc are played randomly untilyou release the mode or press [∫] in random repeatplay.≥You cannot select random repeat play during programplay.≥The resume function does not work when random re-peat is on.≥The mode is canceled when you disconnect the powersource or open the lid.Album modeDisc modeBMODEOther Useful FunctionsChanging the contrast1 While stopped, set [HOLD] to thehold position. (See page 2.)2 Press and hold [1/;] and...3 Press [i, VOLUME, j].i: darker, j: lighterTRACKALBUMMP3M1RNDS-XBSTRACKALBUMMP3M1RNDS-XBSTRACKALBUMMP3M1RNDS-XBSTRACKALBUMMP3M1RNDS-XBSTRACKALBUMMP3M1RNDS-XBSabcdfeALBUMMODEDISPLAYALBUMALBUMKHOLDNGVOLUMEEChanging the informationdisplayed for MP3 tracksYou can show album and track titles.Press during play.The information changes each time you press the button.a album titleb track titlec ID3 album titled ID3 track titlee Track number in playf Elapsed playing time of each trackNote!≥The display shows up to 6 characters at once. Longertitles scroll from left to right.≥This unit can display up to 30 characters each foralbum, track, ID3 album, and ID3 track titles. (“~” ap-pears at the end of the title if it is longer than this.)≥“ ” is displayed if titles with ID3 tags haven’tbeen entered.≥Titles entered with 2-byte code cannot be shown cor-rectly on this unit.