Panasonic SL-MP30 Operating Instructions Manual

Also see for SLMP30 - PORT. CD PLAYER: Operating instructions Operating instructions Operating instructions

Contents

Panasonic SL-MP30 Operating Instructions Manual Manual pdf 3 page image

Sequential Play Basic PlayOPEN342 HOLD1 OPENOPENVOLUME/LR5S-XBSHOLDHOLDLabel must face upward.Track number in playElapsed playing time of each track3Plug type:3.5 mm (1/8 in.) stereoClose the lid.Button Display/referenceOperationTo pause playTo stop playTo turn off theunitSkip forward/backward(skip function)Rapid forward/backward(search function)Off modeStop modeFor your reference:“)” indicationThis indication appears for about 30 seconds if [1/;] ispressed when no disc is loaded in the unit or if the discis not properly secured.“*” indicationThis indication appears for about 10 minutes when thelid is opened. (However, the indication does not appearwhen the unit is off.)Removing discs1 Press [∫] to stop play and disc rotation.2 Slide [OPEN 1] to open the lid.3 Press [PUSH] to release the disc.Do not stop the disc by hand or try to remove it before itstops rotating. This can damage CDs.Note!Never insert foreign objects into the unit.Auto-off functionIf you leave the unit in stop mode for about 10 minutes(30 seconds if disc is not loaded), it turns off to save thebatteries.OPENPUSHPUSHHOLD≥During program play (page 4), these buttons areused to skip forward or backward through theprogrammed sequence of tracks.≥You cannot skip to tracks that have been playedin random or random repeat play (page 4).≥During program play, 1-track repeat play, randomplay and random repeat play (page 4), search op-eration is limited to the current track only.Press during play.Press during play.Press during stop mode.Press during play.(Press [:] twice to skip to thebeginning of the previous track.)Press again to restart play.Press and hold during play.BackwardForwardS-XBSS-XBSTotal number of tracksTotal playing timeResume function notes≥Opening the lid while in the stop mode or replacing the disc while in the off mode cancels the function. (It may re-main active if you replace a disc in the off mode.)≥Play may resume from the beginning of the next track if you stopped play near the end of a track.≥The resume function works automatically and cannot be turned off.No indicator is shown.Resume functionPlay starts from the beginning ofthe current track the next time youpress [1/;].Note on CD-R and CD-RWThis unit can play CD-DA format audio CD-R andCD-RW that have been finalized§ upon completionof recording. It may not be able to play some CD-Ror CD-RW due to the condition of the recording.§Finalizing is a process that enables CD-R/CD-RWplayers to play audio CD-R and CD-RW.Follow steps 1–5.In step 2: Connect the stereo headphones or stereo earphones to the [Ë] jack. (Plug in firmly.)In step 5: The volume range is 0-25. Press and hold to change the volume successively. The volume changes whenpressed while the level is displayed. If any other display is shown, it changes to show the current level.≥Play stops automatically when all the tracks have been played.Downloaded From Disc-Player.com Panasonic Manuals