5Using the Unit with Optional AccessoriesUsing the unit with an audio systemStereo connection AUse a stereo connection cable (not included) to listen to CDsthrough your home audio system.≥Turn off the amplifier before connecting the cable.≥Do not connect the cable to the PHONO jacks on the amplifier.≥Obtain the optional connecting cable if the amplifier comes withmini-phone jacks.≥Adjust the volume level on the amplifier.Note.≥Sound quality changes when S-XBS, TRAIN or LIVE is select-ed, but volume is reduced by approximately fifty percent.≥Set anti-shock to the 10-second mode or turn it off for purersound. The 40-second mode digitally compresses the audio sig-nal.≥You can connect speakers, active or otherwise, with an imped-ance of 1 k≠ or less to the headphone jacks. Set the unit’s vol-ume between 4 and 6.Digital connection BUse a optical cable (not included) to connect to digital recordingequipment, such as a mini-disc deck.≥Turn off the mini-disc deck before connecting the cable.≥Use the AC adaptor to power this unit.≥Turn the anti-shock function off.Note.≥Sound quality is unchanged when S-XBS, TRAIN or LIVE is se-lected.≥This connection can not be used if the unit is powered with bat-teries.Using the unit with a car audiosystemItems to be purchasedFor connection to the car audio system:Car stereo cassette adaptor (SH-CDM10A)For securing the unit and connecting the powersupply:≥Car adaptor (SH-CDC9)≥Car mounting kit (SH-CDF7)Note.It may not be possible to use the unit with some types of carstereo owing to restrictions imposed by the construction of thecar stereo cassette adaptor.For further details, refer to the instructions of the part concerned.LRoABMaintenance[OUT] jackSide panel of the unit(Red)(White)Stereo phonocable (not included)To CD or AUXterminalsAmplifierAir blower forcamera lensLensLensConnect the car stereo cassette adaptor to the unit’sheadphone jack. (When doing this, keep the unit’sVOLUME at a setting between 4 and 6.)Using the Wired Remote ControlThe remote control can be operated regardless of the hold modeof the unit.Preparation:Release the remote control from the hold mode.∫ Operation confirmation tonesWhen an operation button is pressed, a confirmation tonesounds. Refer to the parentheses in the illustration for the differ-ent types of confirmation tones.How to use the wired remote controlTo start playTo stop playTo turn off theunitPress once during off or stop mode.Press once during play.Press and hold during play or stopmode.SkippingtracksSearchingthrough tracksTo adjust thevolumeTurn during playTurn and hold during play.When adjusting the volume using theremote control, position the volumecontrol on the unit between 4 and 6.HOLD2HOLDrs VOLUMEPUSHPUSHPUSHsrsrPUSHPUSHrsHOLD2VOLUME(Beep...Beep)(Beep)(Beep...Bee...p)(Beep Beep)(Beep Beep Beep)Backward Forward[OPT OUT] jackSide panel of the unitOptical cable(not included)Mini-disc deckTo optical in jackIf the surfaces are dirtyTo clean this unit, wipe with a soft, dry cloth.If the surfaces are extremely dirty, use a soft cloth dipped in asoap-and-water solution or a weak detergent solution.≥Never use alcohol, paint thinner or benzine to clean this unit.≥Before using chemically treated cloth, read the instructions thatcame with the cloth carefully.Maintaining the lensOpen the lid and clean the lens as shown in the figure.Use a cotton swab to gently wipe off any finger-prints.Recommended product: Lens cleaner kit (SZZP1038C)