Panasonic SL-CT470 Operating Instructions Manual

Also see for SL-CT470: Operating instructions Operating instructions Operating instructions

Contents

Panasonic SL-CT470 Operating Instructions Manual Manual pdf 4 page image

Skip playThe disc plays from the selected track through to the last track,then play stops automatically.Preparation: Put unit in stop mode. (See page 3.)12 Select the desired track.3Program playUp to 24 tracks can be entered in the program.Preparation: Put unit in stop mode. (See page 3.)12 Select the desired track.3 Register in sequence.(The indication “M” and the programmed sequence appearon the display.)4 Repeat steps 2 and 3 to program all thedesired tracks.5∫ To program the same track in the sequence morethan onceAfter step 3, press [MEMORY/RECALL] the desired number oftimes.∫ If “'” is displayedNo more tracks may be programmed.∫ To confirm the contents of the programPress [MEMORY/RECALL] while the disc is playing. (The num-bers of the programmed tracks appear on the display in se-quence.)∫ To delete the entire programPress [∫, OPR OFF].Random play12For your reference:≥It is also possible to press [9] while the unit is in stop modeto change the first track to be played. (All tracks are playedeventually, regardless of which is played first.)≥Program play is not possible in the random mode.Resume playThis function allows you to listen from the beginning of the trackwhere play stopped because the unit was powered off (orswitched to stop mode). It is useful when listening to CDs in thecar, etc.For your reference:≥If [RESUME, RANDOM, NORMAL] is put in the [RESUME] po-sition, the all-track repeat function will be activated automatical-ly as soon as the unit is powered on.≥If power is cut off near the end of a track (off mode), playbackmay resume from the beginning of the next track.≥If the unit is powered off while a disc was playing and then anew disc is inserted, play will begin from the middle of the newdisc because the unit remembers the position where playstopped on the previous disc.Repeat functionPress during play or stop mode.The setting is switched in the sequence indicated below eachtime [`] is pressed.1-track repeat (1 `)( -----------]One track is repeated. |v |All-track repeat (ALL `) |All the tracks on the |disc are repeated. |v |Cancel (no indicator is shown) --}For your reference:If “ ALL `” is selected during program play, only the tracks inthe program are repeated.(The indication “ALL” is not displayed.)Changing the sound qualityPress during play or stop mode.The setting switches in the sequence indicated below each time[EQ] is pressed.S-XBS>TRAIN>LIVE>Cancel (no indicator is shown)^---------------------------------------------------}S-XBS:Select this setting to boost the low-range response.TRAIN:Select this setting to avoid annoying other passengers with noisefrom your earphones while riding on the train, or to reduce fa-tigue when listening for a long period of time.LIVE:Select this setting for a live concert effect.ReleaseRelease4BEQOther Play MethodsThe letters such as A in the various illustrations refer to the descriptions in the “Location of Controls” section. (See page 3.)K RESUME RANDOM NORMALC 9 5: 6G ;1K RESUME RANDOM NORMALG ;1K RESUME RANDOM NORMALE`K RESUME RANDOM NORMALK RESUME RANDOM NORMALK RESUME RANDOM NORMALC 9 5: 6AMEMORY/RECALLG ;1Anti-Shock FunctionThe anti-shock function works by reading audio data and storingit in memory (up to 40 seconds worth). The unit then fills in inter-ruptions caused by bumps and vibrations with data from thememory. This unit also incorporates a powerful anti-shock mech-anism that prevents skipping caused when play speed ischanged by swinging of the unit.Press during play or stop mode.The following indicator appears on the display.Note!If you have pressed [A.SHOCK] when the unit is in stop mode,press [1;] to start play.When bumps continue repeatedlyThe message “SORRY” appears on the display and sound is in-terrupted.To cancel the anti-shock functionPress [A.SHOCK] again.Note.≥The anti-shock setting can be changed during play, but thismay cause a slight interruption in the sound because the disc’srotational speed changes.≥During the anti-shock operation, the disc rotates at a higher ratethan usual in collecting extra audio data.≥This could result in a slight increase in disc rotation noise.Listening to sound with the unit connected toan audio systemThe anti-shock function uses digital signal compression technolo-gy. It is recommended that the anti-shock function be cancelled ifthe unit is connected to a home audio system.RQT5348FA.SHOCKD S-XBS A.SHOCKDSORRYS-XBS A.SHOCK

/ 6

Related manuals for Panasonic SL-CT470