Menu
Panasonic SC-VKX95 Operating Instructions Manual
                                |
24 RQT9950“AUDIO” menuDOLBY DIGITAL BITSTREAMPCMDTS BITSTREAMPCMFor the Middle East and South AfricaMPEGBITSTREAMPCM Select “BITSTREAM” when the equipment candecode the bitstream (digital form of multi-channeldata). If not, select “PCM”. (If the bitstream output tothe equipment without a decoder, there can be highlevels of noise output that can do damage to yourspeakers and hearing.)DYNAMIC RANGEON: Adjust for clarity even when the volume is low.The range between the lowest and the highestsound levels is compressed. Convenient for latenight viewing. (Only works with Dolby Digital.)OFF“DISPLAY” menuLANGUAGESelect the language for the on-screen messages.ENGLISH FRANÇAIS ESPAÑOLPУCCKИЙ“HDMI” menuVIDEO PRIORITYON: When using the HDMI AV OUT terminal forvideo output. The resolution of the video outputfrom the HDMI AV OUT terminal is optimisedaccording to the capability of the connectedequipment (e.g. TV).OFF: When not using the HDMI AV OUT terminal forvideo output.AUDIO OUTON: When audio output is from the HDMI AV OUTterminal. (Depending on the capabilities of theconnected equipment, audio output may differfrom the audio settings of this system.)OFF: When audio output is not from the HDMI AVOUT terminal. (The audio is output using thesettings of this system.)RGB RANGESTANDARDENHANCED: When the black and white images arenot distinct.“OTHERS” menuSLIDE SHOW TIMETo change the slideshow time.1 SEC to 15 SEC (in 1-unit)15 SEC to 60 SEC (in 5-unit)60 SEC to 180 SEC (in 30-unit)“3 SEC” is the factory preset.EASY SETUPSET: Shows the EASY SETUP settings.DVD-VR/DATASelect to play only DVD-VR or DATA format.DVD-VR: To play video on DVD-R/RW.DATA: To play data files on DVD-R/RW.SCREEN DIMMERThis is to prevent burnt mark on the TV screen.OFFWAIT 5 MIN: If there is no operation for 5 minutes, thepicture becomes grey. The TV screenwill go back to the normal position whenyou do some operations. (This does notapply during video playback.)DEFAULTSThis returns all values in the SETUP menus to thedefault settings.RESETThe password screen is shown if “RATINGS”(Z 23, “RATINGS”) is set. Input the same passwordand then press [OK], then switch off the system andswitch on again. |
Related manuals for Panasonic SC-VKX95
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved