Panasonic SC-VK61D Operating Instructions Manual

Panasonic SC-VK61D Operating Instructions Manual Manual pdf 30 page image

RQT770530Recording operationsSelection of tapes for recordingUse normal position tapes.High position and metal position tapes can be used, but this unit willnot be able to record or erase them correctly.Preparation:Wind up the leader tape so recording can begin immediately.1 Press [c DECK 2] on the main unit and insert thecassette to be recorded.Insert with the side to be recorded facing towards you and theexposed tape facing down.The tape direction is automatically set to “F”.2 Press and hold [PLAY MODE] on the remote control toselect the reverse mode.Each time you press and hold the button:: One side only records., : Both sides record (forward → reverse).“ ” is automatically changed to “ ” when [[ REC] is pressed.RecordingRECDECK 2STOPDVD/CDDECK 1PROGRAMPROGRAMTV/VIDEOTV/VIDEO SETUPSETUP DIMMERDIMMERCSMCSMDISCDISCREPEAREPEATGUI DISPGUI DISPENTERENTERRETURNRETURNSLOW/SEARCHSLOW/SEARCHZOOMZOOMQUICK REPLAQUICK REPLAYSOUND EQSOUND EQS.SOUND EQS.SOUND EQSURROUNDSURROUNDADVADVANCEDANCEDC AN CELD IRE CTN AV I GATO RTO PME NUP.MEM ORYD VD/CDPLA YL IS TM ENUVOL UMESHIFTSHIFTMANUALMANUAL EQEQT AP ETUNE R/ AU XTVTVVOLVOLTVTVVOLVOLTVTVCHCH TVTVCHCHPAGEAGE GROUPGROUPD.RE-MASTERD.RE-MASTERS L E E PS L E E PA U TA U T O O F FO O F F C L O CC L O C K /T I M E RI M E R P L AY /R E CR E CSKIPTVTVECHOECHOMUTINGMUTINGV.MUTE.MUTE AUDIOAUDIOPLAPLAY MODEMODE#SUBTITLESUBTITLEPLAY MODETAPE//REW//FF/DVD/CDSKIPSHIFTTAPE3 Select the source to be recorded.Radio recording:Tune in the station. (A page 26)Disc recording:1 Insert the disc(s) you want to record.Press [-/J DVD/CD] (remote control: [- DVD/CD]) and then[L STOP] (remote control: [L]).2 Prepare the desired disc recording mode.• To record programmed tracks (A do steps 1–3 on page 17for CD, MP3 or WMA).• To record specific disc(s)/tracks (A do steps 1–2 on page16 for CD, MP3 or WMA).Ensure disc is stopped.For 1-SONG mode: Press [g/REW/4] or [3/FF/f](remote control: [g, 4] or [f, 3]) to select the track.Tape-to-tape recording:1 Press [/ - TAPE] and then [L STOP] (remote control: [L]).2 Press [c DECK 1] on the main unit and insert the cassetteyou want to record.4 Press [[ REC] on the main unit to start recording.To stop recordingPress [L STOP] (remote control: [L]).If the tape finishes before the discThe disc continues playing. Press [L STOP] (remote control: [L]) tostop it.Reducing noise when recording AMRemote control onlyHold down [PLAY MODE] while recording.Each time you hold down the button: BP1 ↔ BP2Choose the setting with the least noise.Note• Changes to volume and sound/field quality do not affect recordingexcept for Advanced Surround and Double re-master.• You cannot open deck 1 while recording.• You cannot fast-forward or rewind one deck while recording withthe other.• Multi-channel sources are automatically down-mixed to 2channels during recording.Erasure preventionUse a screwdriver or similarobject to break out the tab.To re-record on a protected cassetteCover the hole with adhesive tape.To erase a tape1. Press [/ - TAPE] and then[L STOP] (remote control: [L]).2. Insert the recorded tape into deck 2.Ensure there is no tape in deck 1.3. Press and hold [PLAY MODE] on theremote control to select reverse mode.4. Press [[ REC].Side ATab for side B Tab for side AAdhesive tape