Panasonic SC-TM23 Service Manual

Contents

Panasonic SC-TM23 Service Manual Manual pdf 39 page image

12.5 To clear all Error code1. Press “STOP/TUNE MODE” button for 5 seconds.2. FL indicator shows “CLEAR” for 1 second andchange to “T”.12.6 How to get out from Self-Diagnostic function1. Press “Power” button OFF.12.7 Power Amplifier Failure (F61)1. When power amplifier fail, F61 will indicateautomatically.12.8 Description of Error Code12.8.1 Abnormality detection for DeckMechanism blockNo. Abnormal Items Error Method of DetectionDisplay1 MODE SW abnormal H01 Normal operation during mecha transition, MODE SW abnormal is memorized. Thecontent ofabnormality can be confirmed in the abnormal detection mode explained in thelater section.2 REC INH SW abnormal H02 The content of abnormality can be confirmed in the abnormal detection modeexplained in the latersection.3 HALF SW abnormal H03 The content of abnormality can be confirmed in the abnormal detection modeexplained in the latersection.4 Reel pulse abnormal F01 The content of abnormality can be confirmed in the abnormal detection modeexplained in the latersection.12.8.2 Abnormality detection for CD/ChangerblockNo. Abnormal Items Error Method of DetectionDisplay1 REST SW abnormal F15 Under normal operation (Self-Diagnostic Mode inclusive), this error occurswhen the REST SW ONis not detected within the specified time and shall be memorized.2 Transmission error between F26 Under normal operation (Self-Diagnostic Mode inclusive), this error occurswhenCD servo LSI and micon the selection is set to CD and SENSE=’H’ isdetected and SENSE=’L’ is notdetectedwithin a fail safe time (20ms) after system command transmission was sent.3 CLAMP SW abnormal F16 Refer to section 12.8.4 (Mechanism Error Code Table) [M-0A] error isdetected.4 BOTTOM SW abnormal F17 Refer to section 12.8.4 (Mechanism Error Code Table) [M-09] error isdetected.5 POSITION SW abnormal F27 Refer to section 12.8.4 (Mechanism Error Code Table) [M-05 ~ M-08] error isdetected.6 SW1 abnormal F28 Refer to section 12.8.4 (Mechanism Error Code Table) [M-02 ~ M-08] error isdetected.7 SW2 abnormal F29 Refer to section 12.8.4 (Mechanism Error Code Table) [M-02 ~ M-08] error isdetected.8 OPEN SW abnormal H15 Refer to section 12.8.4 (Mechanism Error Code Table) [M-01] error isdetected.9 CLOSE SW abnormal H16 Refer to section 12.8.4 (Mechanism Error Code Table) [M-01] error isdetected.10 DISC SENSOR F30 Refer to section 12.8.4 (Mechanism Error Code Table) [M-01] error isdetected.39