Panasonic SC-PT750 Operating Instructions Manual

Contents

Using the EZ ync™ "HDAVI ControI™''PAUSE~ PLAYSKIP ~ ~ SKIP.... o RETURNSTOP~EZ SyncITOP MENU IMENUControl PanelYou can control the disc menus of the home theater system with the TV'sremote control when using the "DVD/CD" source. When operating theTV's remote control, refer to the below illustration for operation buttons.Select the theater operation menu by using @fENTER/the television menu settings. ... PLAY(For details, refer to the operating instructionsof your television.) ~ 0-RETURN• The home theater system will automaticallyswitch to "DVD/CD" if it is in "AUX" mode.2 Select the desired item.• "TOP MENU": Shows a disc top menu(.. page 15,18) orprogram list (.. page 19).."MENU": Shows a disc menu(.. page 15, 18) or playlist (.. page 19).• "Control Panel": The basic operations fordiscs are available.IB• Depending on the menu, some button operations cannot be performedfrom the TV's remote control.• "Control Panel" can be selected directly by using a button on the TV'sremote control (e.g. [SUB MENU])."III,•• U••tll1l Bill, IIltlllll'l IilllllBls•••111111111., "HDIIVI CII.IIi.1 H"IIBOnly the home theater system turns off when you press [ for shutting itdown. Other connected equipment compatible with EZ Sync "HDAVIControl" stay on.• When switching between the theater and television speakers, the TVscreen may be blank for several seconds.When the television is turned off, the home theater system goes intostandby mode automatically.• This function works only when "DVD/CD" or "AUX" is selected as thesource on the home theater system.• When the television is turned on, the home theater system does not turnon automatically. (Power on link is not available.)You can select whether audio is output from the home theater system orthe television speakers by using the television menu settings. For details,refer to the operating instructions of your television.Home theaterTheater speakers are active.• When the home theater system is in standby mode, changing the televisionspeakers to theater speakers in the television menu will automatically turnthe home theater system on and select "AUX" as the source.• The television speakers are automatically muted.• You can control the volume setting using the volume or mute button onthe TV's remote control. (The volume level is displayed on the mainunit's FL display.)• To cancel muting, you can also use the home theater remote control (.. page 10) .• If you turn off the home theater system, television speakers will beautomatically activated.TVTelevision speakers are active.• The volume of the home theater system is set to "0".- This function works only when "DVD/CD" or "AUX" is selected as thesource on the home theater system.• Audio output is 2-channel audio.ONE TOUCH PLAY-.----;;: - ;----.......;;.~- ~ SLOW/SEARCH.. PLAYIBPlayback may not be immediately displayed on the television. If you missthe beginning portion of playback, press [~] or [ ........ ] to go back towhere playback started.Whenever the connection or settings are changed, reconfirm the pointsabove.You can turn on the home theater system and television, and start playingthe disc in the play position with a single press of a button.~ ::;; :-; ::;: ~&1•• 111118111111;1 ~ ,Press [ONE TOUCH PLAY].Theater speakers will be automatically activated (.. right).• This function also works if you press [~ PLAY] on the home theaterremote control during home theater standby mode.Preparation• Confirm that the HDMI connection (.. page 6) has been made.• Set "EZ Sync" to "On" (.. page 24, "HDMI" menu).• To complete and activate the connection correctly, turn on all EZ Sync"HDAVI Control" compatible equipment and set the television to thecorresponding HDMI input mode for the home theater system.EZ Sync "HDAVI Control"EZ Sync "HDAVI Control" is a convenient function that offers linkedoperations of this unit, and a Panasonic television (VIERA) under "HDAVIControl". You can use this function by connecting the equipment with theHDMI cable. See the operating instructions for connected equipment foroperational details.This unit supports "HDAVI Control 2" function.The TV with "HDAVI Control 2" function enables the following operation:EZ Sync Control only with TV's remote control (for "HDAVI Control 2") (.. right)• When you switch the television input to:- TV tuner mode, the home theater system will automatically switch to"AUX".- HDMI input mode for the home theater system, the home theatersystem will automatically switch to "DVD/CD" if it is in "AUX" mode.g •When you start disc play, the television will automatically switch to the~ HDMI input mode for the home theater system.aa: