Menu
Panasonic SC-HTB680 Operating Instructions Manual
Also see for SC-HTB680: Operating instructions
                                                                                                |
20 RQT9920For NFC-compatible Bluetooth ® devices(Android TM devices) onlySimply by touching an NFC (Near FieldCommunication)-compatible Bluetooth ® device onthe main unit, you can complete all preparations,from registering a Bluetooth ® device toestablishing a connection.Preparation≥ Turn on the NFC feature of the device.≥ Android device version lower than 4.1 requiresthe installation of the app “Panasonic MusicStreaming” (free of charge).1 Enter “Panasonic Music Streaming” in the searchbox of Google Play TM to search, and then select“Panasonic Music Streaming”.2 Start the app “Panasonic Music Streaming” on thedevice.– Follow on-screen instructions on your device.– Always use the latest version of the app.Press [ ] to select “BLUETOOTH”.Touch and hold your device on theNFC touch area of the main unit [ ].(> 6)Do not move the Bluetooth® device until it beeps,displays a message or reacts in some way.Once the Bluetooth® device has reacted, move thedevice away from the main unit.≥When the registration and connection of the Bluetooth ®device is complete, the name of the connected device isindicated on the display for a few seconds.≥The location of the NFC touch area differs depending onthe device. When a connection cannot be establishedeven if your Bluetooth ® device has touched the NFCtouch area of the main unit, change the position of thedevice. The condition may also improve if you downloadthe dedicated app “Panasonic Music Streaming” andstart it up.Start playback on the Bluetooth ®device.≥ If you touch another device to the main unit, you canupdate the Bluetooth® connection. The previouslyconnected device will be disconnected automatically.≥ When the connection is established, playback may startautomatically depending on the type of device being used.≥ The One-Touch Connection may not work properlydepending on the type of device being used.Remote control codeWhen other Panasonic devices respond to thissystem’s remote control, change the remotecontrol code on this system and the remotecontrol.Preparation≥ Turn off all other Panasonic products.≥ Turn on the main unit.∫ To set the code to “REMOTE 2”Press and hold [MUTE] and [OK] for more than4 sec.“REMOTE 2” is indicated on the display.∫ To set the code to “REMOTE 1”Press and hold [MUTE] and [4] for more than4 sec.“REMOTE 1” is indicated on the display.One-Touch Connection(Connecting by NFC) |
Related manuals for Panasonic SC-HTB680
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved