Panasonic SC-BT100 Operating Instructions Manual

Also see for SABT100 - BLU-RAY DVD HOME THEATER SOUND SYSTEM: Operating instructions

Contents

34RQT9129Changing settings with the setup menu(Center, surround and surround back speakers only)1 Press [3, 4, 2, 1] to select the speaker icon and press [OK].2 Press [3, 4] to select the setting and press [OK].Icon examples:(Effective when playing multi-channel audio)(Center, surround and surround back speakers only)For optimum listening with 7.1/5.1-channel sound, all the speakers,except for the subwoofer, should be the same distance from theseating position. If you have to place the center, surround andsurround back speakers closer to the seating position, adjust the delaytime to make up for the difference.If either distance A or B is less than C, find the difference in therelevant table and change to the recommended setting.: Actual speaker position: Ideal speaker positionABC: Primary listening distance1 Press [3, 4, 2, 1] to select the delay time box and press [OK].2 Press [3, 4] to select the setting and press [OK].(Effective when playing multi-channel audio)1 Select “Test” and press [OK].A test signal is output.Front (L) ——)Center ——)Front (R) ——) Surround (RS): ;Surround (LS)(— Surround back (LB) (— Surround back (RB)2 While listening to the test signal, press [3, 4] to adjust the volumeof each speaker.Center speaker: (r6 dB to s6 dB)Surround and Surround back speakers: (r10 dB to s10 dB)≥Set each speaker level according to the volume of the Front (L)and Front (R) speaker volume respectively.3 Press [OK].The test signal stops.≥No signal is output for the subwoofer. To adjust its volume, seepage 26, Adjusting speaker level during play.∫ To finish the speaker settingPress [3, 4, 2, 1] to select “Complete” and press [OK].Speaker settingsSpeaker presence settingsCenterSelect when the center speaker isconnected and in use.Select when the center speaker is notconnected or not in use.SurroundSelect when the surround speakers areconnected and in use.Select when the surround speakers arenot connected or not in use.Surroundback§1Select when– using the optional Panasonicwireless system SH-FX67 andspeaker system SB-HS100A toenjoy 7.1ch surround sound.– connecting an amplifier to theSURROUND BACK terminal at theback of the main unit to enjoy 7.1chsurround sound.Select when the surround back speakersare not connected or not in use.§1Surround back speakers are set to “ ” by default.§2You can select “ ” only when surround speakers are set to “ ”.msmsLCompleteTestRSWRSdBdBdB0.0dB0.0dB0.0msLB RB0.00.00.0 0.00.0C dB0.0LSCenterSurroundSurround back§1C§2LSLBmsmsL RSWRSdBdBdB0.0dB0.0dB0.0msLB RB0.00.00.0 0.00.0C dB0.0LSCompleteTestmsmsL RSWRSdBdBdB0.00.00.0 0.00.0C dB0.0LSdB0.0dB0.0msLB RB0.0CompleteTest5.1ch speaker connection 7.1ch speaker connectione.g.,Changing the delay timeA Center speaker B Surround/Surround backspeakersDifference SettingApprox. 34 cm (1 ft. 1 in.) 1.0 ms Difference SettingApprox. 170 cm (5 ft. 6 in.) 5.0 msApprox. 68 cm (2 ft. 2 in.) 2.0 msApprox. 102 cm (3 ft. 4 in.) 3.0 ms Approx. 340 cm (11 ft. 1 in.) 10.0 msApprox. 136 cm (4 ft. 5 in.) 4.0 ms Approx. 510 cm (16 ft. 8 in.) 15.0 msApprox. 170 cm (5 ft. 6 in.) 5.0 msLLSRSWCRSCRSLS LLBRRSSWCRBCRBRSLSLB LSApproximate room dimensionsCircle of constant primary listening distance5.1ch speaker connection 7.1ch speaker connectionmsLCompleteTestLSRSWRSdBdBdB0.00.0 0.00.0C dB0.0ms0.0dB0.0dB0.0msLB RB0.0CenterSurroundSurround backAdjusting speaker levelmsmsLCompleteTestLSRSWRSdBdBdB0.00.00.0 0.00.0C dB0.0dB0.0dB0.0msLB RB0.0CenterSurround back (RB)TestSurround(LS)Surround (RS)Surround back (LB)