12RQT8552Home Theater connectionsMake the following connections when you wish to install a second pair of speakers in another room and enjoy music there.• Select “SPEAKERS B” when you wish to enjoy sounds from speakers connected to the FRONT B terminals (á page 18).• If you select SPEAKERS B only, playback is 2-channel. When a multi-channel source is played, the sounds intended for all thespeakers are played through the front left and front right speakers (2CH MIX).Connecting speakersConnecting a second pair of front speakersY PB PR Y YPB PR PB PRBI-WIRELF HF) INVIDEOOR DVD PLAYERIN INDVD RECORDERINVCRINTV/STBND FRONT/DVD 6CH INAUDIOINDVD RECORDERINVCRINTV/STBOUTSUBWOOFERLRFRONT A FRONT BLRCENTER SURROUNDLRSURROUND BACKLRTV MONITOR OUT DVD RECORDER INCOMPONENT VIDEOTV / STB INSPEAKERSSpeaker cableThe unit’s rear viewFront speaker (R) Front speaker (L)Speaker impedanceFront A and B: 6 to 16 ΩFront B: 6 to 16 ΩNoteConnecting antennas(TV/STB)OPTICAL1DIGITAL IN(DVD RECORDER) (DVD PLAYER) (CD)OPTICAL2 COAXIAL1 COAXIAL2OUT (DVD RECORDER) INS VIDEOOUTTV MONITORINDVD PLAYERINDVD RECORDERINTV/STBOUTTV MONITOR DVD PLAYERINDLRINCDCENTERSUBWOOFER SURROUND FRONTDVD/DVD 6CH INAUDDLOOP EXTLOOP EXTLOOP EXTAM ANTFM ANTLOOP ANTGND12FM ANTFM ANT132BlackRedWhiteAM loop antenna (included)Keep the antenna cord awayfrom DVD recorders, DVDplayers, and other cords.FM indoor antenna(included)Fix the other end ofthe antenna wherereception is best.To connect a 75 Ω coaxial cableFM outdoorantennaFM outdoor antenna (not included)• Disconnect the FM indoor antenna.• The antenna should be installed by a competent technician.(For continental Europe and the United Kingdom)Antenna plug adapter (included for the United Kingdom)75 Ω coaxial cable(For Australia and New Zealand)Two types of wire commonly used for connection from theantenna are 300 Ω parallel feeder wire and 75 Ω coaxialcable. For best resistance to interference, use 75 Ω coaxialcable. FM outdoorantenna75 Ω coaxialcable300 Ω feeder wireAntennaplugadapter(included)orRemove a piece of theouter vinyl insulator.10 mm7 mmCarefully pull the tabsapart to remove thecover.Remove the lead wire andclamp it with the plastic bar.Lead wirePlastic bar Install the coaxial cable.Clamp the cable conductor, andwind it on so that it does notcontact anything else.Clamp with pliers. Attach the cover.To connect a 300 Ω feeder wireLoosen the screws, connect the wires, andtighten the screws to secure the connection.Adhesive tapeThe unit’s rear viewHome Theater connections ENGLISH• Turn off all components before making anyconnections.• Peripheral equipment and cables sold separatelyunless otherwise indicated.• To connect equipment, refer to the appropriateoperating instructions.