Panasonic SA-AK640PL Service Manual

Contents

Panasonic SA-AK640PL Service Manual Manual pdf 30 page image

Step 1 Detach FFC cable (CN971).Step 2 Disconnect FFC cable (CN1001).Step 3 Remove the 5 screws.Step 1 Remove 2 screws.Important notes: Ensure all the trays are in the “STOCK”position before proceeding to the disassemble of traverseunit. For procedures to set the trays in “STOCK” position,please refer to original Service Manual for CRS1, Section 7.Disassembling Procedure When Tray In Play Position,Order No. MD0509368C0.Step 4 Push the lever upward, and then open the cassette lidass’y (For DECK1 and DECK2).Step 5 Tilt the cassette mechanism unit in the direction ofarrow (1), and then remove it in the direction of arrow (2).Note: For disassembly of parts for deck mechanism unit,refer to Section 10.15.Step 2 Desolder wire at deck motor terminals (W1002).Step 3 Remove Deck P.C.B.10.12. Disassembly of Deck mechanism unit· Follow the (Step 1) - (Step 2) of Item 10.4 - Disassembly of Top Cabinet· Follow the (Step 1) - (Step 4) of Item 10.6 - Disassembly of CD Changer Unit· Follow the (Step 1) - (Step 4) of Item 10.10 - Disassembly of Front Panel Unit10.13. Disassembly of Deck P.C.B.· Follow the (Step 1) - (Step 2) of Item 10.4 - Disassembly of Top Cabinet· Follow the (Step 1) - (Step 4) of Item 10.6 - Disassembly of CD Changer Unit· Follow the (Step 1) - (Step 4) of Item 10.10 - Disassembly of Front Panel Unit10.14. Disassembly of Traverse Unit· Follow the (Step 1) - (Step 2) of Item 10.4 - Disassembly of Top Cabinet· Follow the (Step 1) - (Step 4) of Item 10.6 - Disassembly of CD Changer Unit30SA-AK640PL