Panasonic RX-D45 Operating Instructions Manual

Also see for RX-D45: Operating instructions Operating instructions

Contents

Panasonic RX-D45 Operating Instructions Manual Manual pdf 4 page image

44ENGLISHESPAÑOLRQTX1040Overview of controlsA MNBID FCG HLJKPDEOA Tape mode/standby switchUnit will be in standby mode.B OPR (operation) indicatorThe indicator lights up when the unit is turned on.C Clock or timer setting, play timer settingD SpeakersThese speakers do not have magnetic shielding. Do not place them neartelevisions, personal computers or other devices easily influenced bymagnetism.E Disc trayF Tuner (FM/AM) selection, auto preset selectionG Disc play or pauseH Stop disc playback, MONO selection for FM modeI Disc tray open or closeJ Play mode function, program function, tuning mode selectionK Track skip or search, check program content, preset channel selection,tuning function, time adjustmentL Sound equalizer (EQ) selectionM Display panelN Volume controlO Cassette play operationsP Cassette deckHeadphone jack (PHONES)Plug type: Ø 3.5 mm stereo (not included)• Avoid listening for prolonged periods of time to prevent hearing damage.• Excessive sound pressure from earphones and headphones can causehearing loss.PHONESDiscsBasic playBasic play1 Press [x, CD OPEN/CLOSE] to open the disc tray and then load thedisc with the label facing up.2 Press [x, CD OPEN/CLOSE] again to close.3 Press [4/9, CD] to start play.Stop playback Press [8] (stop) during play.Pause play Press [4/9, CD] during play.Press again to resume play.Skip tracks Press [–/2] or [6/+].During RANDOM play, you cannot skip to tracks that havebeen played.SearchthroughtracksPress and hold [–/2] or [6/+] during play or pause.• During program play (Z see below), or random play(Z see below, “Play Mode function”), you can searchonly within the track.Play Mode functionPress [·PLAY MODE] repeatedly to select the desired mode.1-TRACKREPEAT1-Play one selected track repeatedly on the disc.Press [–/2] or [6/+] to select the track.REPEAT Repeat play a disc or programmed tracks (Z see below).RANDOMRNDPlay a disc randomly.✒ NoteDuring “Program play”, “Play Mode function” cannot be activated.Program playThis function allows you to program up to 24 tracks.1 Press [4/9, CD] and then [8] (stop).2 Press and hold [–PGM].“PGM” is displayed.3 Press [– /2] or [6/+] to select your desired track.4 Press [–PGM].Repeat steps 3 and 4 to program other tracks.5 Press [4/9, CD] to start play.Cancel programmodePress and hold [–PGM] in the stop mode.Replay the program Press and hold [–PGM] then [4/9, CD] in the stopmode.Check programcontentsPress [–/2] or [6/+] when “PGM” is displayed inthe stop mode.Clear allprogrammed tracksPress and hold [8] (stop) in the stop mode.“CLEAR” is displayed.✒ Note• When you try to program more than 24 tracks, “FULL” appears.• You will not be able to add more tracks to the existing program. The existingprogram has to be cleared.• The program memory is cleared when you open the disc tray.✒ NOTE about using a DualDiscThe digital audio content side of a DualDisc does not meet the technicalspecifications of the Compact Disc Digital Audio (CD-DA) format so playbackmay not be possible.✒ NOTE on CDsChoose discs with this mark:• This unit can access up to 99 tracks.• This unit can play CD-DA format audio CD-R/RW that have been finalised.• It may not be able to play some CD-R/RW due to the condition of therecording.• Do not use irregularly shaped disc.• Do not use disc with labels and stickers that are coming off or with adhesiveexuding from under labels and stickers.• Do not attach extra labels or stickers on the disc.• Do not write anything on the disc.