Panasonic RR-XS410 Owner's Manual

Also see for RR-XS400: Operating instructions

Contents

Panasonic RR-XS410 Owner's Manual Manual pdf 24 page image

VQT3T1324Setting the recording EQ• Set the recording level adjustment to MANUAL beforehand.(➜ page 22) (When the recording level adjustment isAUTO, the unit does not enter the recording standby.)1 Press and hold [* REC] for 1 second or more.The unit enters the recording standby.2 Press [MENU].3 Press +, – to select “REC EQ” and press[q OK] to enter.4 Press +, – to select the recording EQ mode.Press [F1 (CONFIRM)] to confirm the details. Press[F1] again to return to the previous screen.When you select modes other than “USER”, go to step5 .Setting when selecting “USER”:1 After step 4 , press[F1 (EDIT)]150 Hz band is selected.2 Press u, i to select the frequency band tochange, and press +, – to adjust the recording level(±12 dB).3 When the settings for the frequency band to changeare all complete, go to step 5 .5 Press [q OK] to enter.To exit the setting screen, press [F2 (CLOSE)].The EQ mode name is not displayed after exiting thesetting screen.Pressing [* REC] starts recording.EQ mode Effect and applicationFLAT This (basic) mode does not emphasize aspecific sound range.EXTRA BASS Emphasize the bass range strongly.BASS Emphasize the bass range slightly.MIDDLE Emphasize the middle range.BASS&TREBLE Emphasize the bass and treble ranges slightly.TREBLE Emphasize the treble range slightly.EXTRA TREBLE Emphasize the treble range strongly.USERThis mode enables adjustment offrequency bands of 150 Hz, 500 Hz,1 kHz, 4 kHz and 12 kHz.(The factory setting is “FLAT”.)* When the recording level adjustment is AUTO, therecording EQ does not function.Using the recording EQ enables you to set bass, middle and treble range of recording level according toyour preferred settings for recording.The recording EQ includes 7 types of fixed mode and the “USER” mode with which you can set therecording level according to each frequency band.