Panasonic RP-HD305B User Manual

Also see for RP-HD305B: Owner's manual Owner's manual

1 Audio input terminal2 [SOUND] button3 [i] button4 [1/;/ ] button5 [j] button6 Charging terminal (DC IN)7 Power/pairing LED8 [Í/I ( )] button*9 MicrophoneEar padsRaised dot indicating the left side* Í/I: Standby/ONThe rechargeable battery (installed in the unit) is not chargedinitially. Charge the battery before using the unit.Connect this unit to a computer (a) using the USBcharging cord (supplied) (b).• The power/pairing LED (c) lights in red when charging is inprogress. When charging is completed, the power/pairing LED willgo out.• It takes approx. 5 hours to charge the battery from empty to full.• Check the direction of the terminals and plug in/out straight holdingonto the plug. ( It may result in malfunction by the deforming of theterminal if it is plugged in obliquely or in wrong direction.)• It is not possible to turn the power on or connect to Bluetooth ®devices during charging.• Make sure the computer is turned on and is not on standby orsleep mode.• Do not use any other USB charging cords except the supplied one.• When the battery level starts to run low, the blinking power/pairingLED will turn from blue to red, and as it drops further, you will benotified by one beep every 1 minute* When the battery runs out, anEnglish guidance message will be heard and the power will turn off.* If you press [Í/I ( )] twice quickly, an English guidancemessage will be heard and you can check the battery level.Press and hold [Í/I ( )] (a) of this unit for approx.3 seconds until the power/pairing LED (blue) (b) blinks.• A beep will sound, and the power/pairing LED (blue) will blinkslowly.To turn the power offPress and hold [Í/I ( )] for approximately 3 seconds. AnEnglish guidance message will be heard, and the power will beturned off.• If the unit is not connected to a Bluetooth ® device, an Englishguidance message will be heard and turn off the unit automaticallyapproximately 5 minutes after you have stopped using it. (Autopower off)∫ Bluetooth® pairing1 In the power-off state, press and hold [Í/I ( )] of this unituntil the power/pairing LED blinks.– When pairing a device for the first time:approx. 3 seconds– When pairing a second or subsequent devices:approx. 5 seconds• This unit will start to search for a Bluetooth® device to connectto, and the power/pairing LED will light alternately in blue andred.2 Turn on the power of the Bluetooth® device, and enable theBluetooth® function.3 Select “RP-HD305B” (a) from the Bluetooth® device’smenu.• If prompted for a passkey, input the passkey “0000 (four zeros)”of this unit.• When the power/pairing LED (blue) blinks twice every approx.2 seconds, pairing (registration) is completed. (Connectionestablished)• If connection to a device is not established within approximately5 minutes, the unit will be turned off. Perform pairing again.∫ Connecting a paired Bluetooth ® device1 Turn on this unit.2 Perform steps 2 and 3 of “Bluetooth ® pairing”. (l above)• When the power/pairing LED (blue) blinks twice every approx.2 seconds, pairing (registration) is completed. (Connectionestablished)When using the functions below that are indicated with the [ ]mark, connect the Bluetooth ® device and the unit.∫ Listening to music [ ]Select and play the music on the Bluetooth ® device.• The unit’s headphones will output the music or the audio of thevideo being played back.∫ Remote controlling (Available only if your Bluetooth ®device supports “AVRCP” Bluetooth ® profiles) [ ](Operation example)• The volume can be adjusted in 31 levels (16 levels during calls).When the maximum or minimum volume is reached, a beep willsound.∫ Selecting the sound mode [ ]This changes the sound quality of the music or video beingplayed back.Press the [SOUND] button on this unit.• Each press of this button changes the sound quality.– Bass Enhancer : Produces a more dynamic sound effectwith enhanced bass.– Clear Voice : Produces a sound effect which makes humanvoices, such as vocals and dialogues, clear to listen to.– OFF : Turns off sound effects.• The setting immediately before the power is turned off is stored.• You will be notified by audio guidance when the mode is switched.• This may not be effective depending on the music or video beingplayed back.EnglishA Part namesB ChargingC Turning the power on/offD Connecting a Bluetooth® deviceE Using the headphonesPlay / Pause: Press [1/;/ ] (a).Increase the volume: Press [i] (b).Decrease the volume: Press [j] (c).Forward to the start ofnext track: Press [1/;/ ] twice quickly.Return to the start ofcurrent track: Press [1/;/ ] three times quickly.Fast forward: Press [1/;/ ] twice quickly; hold thesecond press.Fast rewind: Press [1/;/ ] three times quickly;hold the third press.