Panasonic Plasma TX-P42G15B Operating Instructions Manual

Also see for VIERA TX-P42G15B: Brochure & specs Service manual Service manual Service manual Service manual

Contents

Panasonic Plasma TX-P42G15B Operating Instructions Manual Manual pdf 84 page image

84Message Meaning / ActionPIN incorrect! The PIN number you entered is wrong.●Please check settings and connectionson HDMI devices. Communication error in VIERA Link function (p. 67).●Please enter a frequency between10700 and 12750 MHzThe frequency you entered is out of range. Consult the received satellite●broadcasting company. (p. 42)Please wait. A function is in progress.●Recording this channel now The recorder is recording the programme from its own tuner. You can turn●the TV off and leave the equipment recording in the normal way.Reset to Factory Shipping ConditionCompleted.Please switch off TV.“Auto Setup” will automatically start when Mains power On / Off switch is●next turned On. (p. 12)Sending Preset DataPlease wait! Q-Link or VIERA Link channel download is in progress.●Software successfully updated.Press EXIT to continue. The software updating is finished.●Software update failed. Please try againlater.Press EXIT to continue.Perform “System Update Search Now” in System Update (p. 48).●If this is still unsuccessful, there may not be any new software available.This timer will not follow the TV GuideinformationPress OK to continue, RETURN to restoreoriginal timerIf you edit the start time or end time of Guide link recording more than●10 minutes, it will no longer be performed as Guide link recording. Therecording will be performed according to the time setting.Timer already expired ! Starting time in Timer Programming is already past. Set correctly (p. 51).●Timer Event Due to StartDVB 1: BBC1 has beenprogrammed for recording at ∗∗:∗∗This message will appear 2 minutes before timer programming event due●to start.Timer incorrect ! Set Start and End times in Timer Programming correctly (p. 51).●Timer overlapPress OK to keep, RETURN to editTimer programming events are overlapped. If you press the OK button,●the first timer programming event will start and finish, the next timerprogramming event can then start.Tuner LockedPlease stop recording to operateIf you want to unlock, cancel Direct TV Recording (p. 66 and p. 68) or●Timer Programming (p. 51).Unable to acquire IP address Unable to obtain the IP address. Check the settings and connections of●the router.Unable to download, please checkequipment The tape or disc is active. Stop the equipment and try again.●SD Card■Cannot read fileThe file is broken or unreadable.●The TV does not support the format.●(For the applicable formats and data p. 77)No SD card inserted Confirm SD Card is inserted correctly.●No valid file to play The card has no data.●Over 9999 pictures found(max. is 9999) Maximum valid number of photos is 9,999.●Please confirm the SD card is OK The inserted SD Card has a problem.●This operation is not possible Your operation is not available.●On screen messages