Panasonic PV-DM2793 Operating Instructions Manual

Contents

Panasonic PV-DM2793 Operating Instructions Manual Manual pdf 13 page image

1313Initial SetupManufactured under license from DolbyLaboratories. “Dolby” and the double-Dsymbol are trademarks of DolbyLaboratories.Manufactured under license fromDigital Theater Systems, Inc. US Pat.No. 5,451,942, 5,956,674, 5,974,380,5,978,762 and other world-wide patentsissued and pending. “DTS” is a registeredtrademark of Digital Theater Systems,Inc. Copyright 1996, 2000 Digital TheaterSystems, Inc. All rights reserved.IMPORTANT NOTE:Caution for optical digital audiooutput connector:• When connecting an amplifier (with an Opticaldigital input connector) which does not containthe Dolby Digital or dts decoder, be sure toselect “PCM” at “Dolby Digital” and “PCM” at“dts” of the Settings for DVD Operation “AUDIOOUTPUT” (see page 59). Otherwise, anyattempt to play DVDs may cause such a highlevel of noise that it may be harmful to yourears and damage your speakers.• When a dts decoder is connected, pleaseselect “Bitstream” at “dts” of the Settings forDVD Operation “AUDIO OUTPUT.” If “PCM”is selected, there will be stereo sound. (Seepage 59).• Video CDs and CDs can be played as usual.• Some dts decoders which do not supportDVD-dts Interface may not work properly withthe unit.Notes on audio output from the opticaldigital audio output connec torEnjoying digital audio output from thedigital audio output connec tor*1 The type of audio output from the connector can beselected by the Settings for DVD Operation. (Seepage 59.)*2 Sound having 96 kHz sampling is converted into48 kHz sampling when it is output from the unit’soptical digital audio output connector.For your reference:• Dolby Digital is a digital sound compression techniquedeveloped by the Dolby Laboratories Licensing Corporation.Supporting 5.1-channel surround sound, as well as stereo(2-channel) sound, this technique enables a large quantity ofsound data to be efficiently recorded on a disc.• Linear PCM is a signal recording format used in CDs. WhileCDs are recorded in 44.1 kHz/16 bit, DVDs are recorded in48 kHz/16 bit up to 96 kHz/24 bit.• If you have a Dolby Pro Logic Surround decoder, youwill obtain the full benefit of Pro Logic from the sameDVD movies that provide full 5.1 channel Dolby Digitalsoundtracks, as well as from titles with the Dolby Surroundmark. For information on Panasonic or Technics Dolby ProLogic Surround Sound Decoders please contact your localdealer.DiscSoundrecordingformatOptical digital audio outputfrom connectorDVDDolby DigitalDolby Digital bitstream(1-5.1 ch) or PCM (48 kHzsampling/16 bit only)*1Linear PCM(48/96 kHz16/20/24 bit)Linear PCM (2ch)(48 kHz sampling/16 bitonly)* 2dts Bitstream or PCM (48 kHzsampling/16 bit only)*1Video CD MPEG 1 PCM(44.1 kHz sampling)CD Linear PCM Linear PCM(44.1 kHz sampling)MP3 MP3 Linear PCM(It depends on the MP3 file)WMA WMA Linear PCM(It depends on the WMA file)NoteTurn down the volume, then turn this unit, as wellas other equipment to be connected, off beforepro ceeding with connection.Do not block ventilation holes of any equipmentand arrange them so that air can circulate freely.Read through the instructions before connectingother equipment.Ensure that you observe the color coding whenconnecting audio and video cables.Check List