Panasonic PT-53X54 Operating Instructions Manual

Also see for PT47X54J - 47" PROJECTION TV: Service manual

Contents

Panasonic PT-53X54 Operating Instructions Manual Manual pdf 11 page image

OPTIONAL EQUIPMENT CONNECTIONS9 zENGLISHProgram Out Connection (PROG OUT)To use the television audio and video with optional equipment,connect the PROG OUT and TO AUDIO AMP connections on theback of the television.Note: If the Main Picture signal is Component Video Input orHDMI, no Program out signal will be available.Procedure• Connect optional equipment to PROG OUT and TOAUDIO AMP L/R terminals.• PROG OUT terminal display is the same as on-screendisplay.• See optional equipment manual for further instructionsfor recording and monitoring.HDMI (High Definition Multimedia Interface)input connectionAbout HDMIHDMI is the first all digital consumer electronics A/Vinterface that supports several uncompressed standards,enhanced and high definition video formats as well asexisting multi-channel audio format. One jack supports bothvideo and audio information. The HDMI/HDCP 1 input canbe connected to an EIA/CEA 8612 compliant consumerelectronic device, such as a set top box or DVD playerequipped with an HDMI or DVI output connection. Byinputting a High-bandwidth Digital Content Protection(HDCP) high definition picture source to the HDMI terminalof this PTV, high definition pictures can be displayed on thescreen in their digital form. The HDMI input terminal is notintended to be used with personal computers. This PTV iscompatible with 1080i, 480p and 480i formats. Select theoutput of the connecting device to match that of the PTV.Notes:1. HDMI/HDCP = High Definition Multimedia Interface /High-Bandwidth Digital Copy Protection.2. EIA/CEA-861 Profiles compliance covers profiles fortransmission of uncompressed digital video includinghigh bandwidth digital content protection.Compatible formatsConnection diagramFollow the diagram below to connect the PTV to a set top box or aDVD player.Procedure• Connect the HDMI output from the set top box or a DVDplayer to the HDMI input on the back of the PTV.• Press TV/VIDEO button on the remote control to selectHDMI input. The interface on the PTV is an HDMI Type Aconnector.• If the external device has a DVI output only, use a DVI toHDMI adaptor cable* 3 to connect to the HDMI jack onthe PTV. Also, connect the Audio Out signal from theexternal device (set top box or DVD player) to the AudioIn*4 jacks below the HDMI input.• If you cannot display the picture because your Digital SetTop Box does not have a Digital Out terminal setting, usethe Component Video Input (or the S-Video Input orVideo Input). In this case, the picture will be displayed asan analog signal.Notes:*3. HDMI-DVI conversion cable (TY-SCH03DH) availableon Panasonic Website: www.panasonic.com.*4. Please refer to page 20 for Audio setting detail.AUDIOINLRANTCABLES NOT INCLUDEDTERMINALS ON BACK OF TELEVISIONS-VIDEOCOMPONENTVIDEO INPUTVIDEO1 2 INPUT PROGOUT TO AUDIOAMPVIDEOYP BP R LRAV IN2 31HDMIINPUT INPUTVCRORMONITORThis PTV is compatible with the following formats. Pleaseset the connecting device to the following format.Video signalAudio signalWhen digital audio is included in the HDMI connection,the compatible sampling frequencies are 48 KHz /44.1Khz / 32 Khz.Format No. of dots Vertical scanningfrequency (Hz)1080i 1920 x 1080i 59.94 / 60480i (480p) 720 x 480p640 x 480p59.94 / 6059.94 / 60480i (480i) 720 x 480i 59.94 / 60IncomingCableEXTERNAL DIGITALCOMPONENTAUDIO OUTL RHDMIOUTNote: Use anolog audio when no digitalaudio is available.AUDIOINLRANTCABLES NOT INCLUDEDTERMINALS ON BACK OF TELEVISIONS-VIDEOCOMPONENTVIDEO INPUTVIDEO1 2 INPUT PROGOUT TO AUDIOAMPVIDEOYP BP R LRAV IN2 31HDMIINPUT INPUT* The connector on the PTV is HDMI Type A connector.