M8eGLPWR+> enableM8eGLPWR+# configureM8eGLPWR+(config-if)# interface gi0/2M8eGLPWR+(config-if)# dot1x port-control autoM8eGLPWR+(config-if)# dot1x re-authenticationM8eGLPWR+(config-if)# dot1x re-auth-timer localM8eGLPWR+(config-if)# endM8eGLPWR+# show dot1x 1-2NAS ID : Nas1Port No : 1Port Status : AuthorizedPort Control : Force AuthorizedTransmission Period : 30 secondsSupplicant Timeout : 30 secondsServer Timeout : 30 secondsMaximum Request : 2Quiet Period : 60 secondsRe-authentication Period : 3600 secondsRe-authentication Status : DisabledPort No : 2Port Status : UnauthorizedPort Control : AutoTransmission Period : 30 secondsSupplicant Timeout : 30 secondsServer Timeout : 30 secondsMaximum Request : 2Quiet Period : 60 secondsRe-authentication Period : 3600 secondsRe-authentication Status : Enabled_LocalM8eGLPWR+#45Fig. 4-9 Display for IEEE802.1X authentication configuration(show dot1x 1-2)