5 PlaybackThumbnail displayThe video data produced on a P2 card by a single shooting session is referred to as a clip. When theunit’s power is turned on, the clips are displayed as thumbnails on the LCD monitor. (If there are manyclips, it will take a few moments for all the clips to be displayed)Playback formatsThe formats which can be played back by this unit are as follows.This unit cannot necessarily play back all the following formats simultaneously. Only the formats thatsupport the setting menu “SYSTEM FREQ” can be actually played back.AVC-Intra100, AVC-Intra501080/60i1080/50i1080/30pN (native recording)*1080/24pN (native recording)*1080/25pN (native recording)720/60p720/30pN (native recording)*720/24pN (native recording)*720/50p720/25pN (native recording)DVCPRO HD1080/60i (30p over 60i, 24p over 60i, 24pA over 60i)*1080/50i (25p over 50i)720/60p (30p over 60p, 24p over 60p)*720/30pN (native recording)*720/24pN (native recording)*720/50p (25p over 50p)720/25pN (native recording)DVCPRO50/5, DV480/60i (30p over 60i, 24p over 60i, 24pA over 60i)576/50i (25p over 50i)* 24p, 30p, 60p and 60i operate with the actual frequencies of 23.98p, 29.97p, 59.94p and 59.94i respectively.Names and functions of thumbnail display screen partsMenu configuration of thumbnail display screen (until the second hierarchy)THUMBNAIL OPERATION PROPERTYALL CLIPSAME FORMAT CLIPSSELECTED CLIPSMARKED CLIPSTEXT MEMO CLIPSSLOT CLIPSSETUPEXITDELETEFORMATREPAIR CLIPEXCH. THUMBNAILRE-CONNECTIONCOPYEXITCLIP PROPERTYCARD STATUSDEVICESPROPERTY SETUPEXITHDDEXPORTEXPLORESETUPEXITMETA DATALOADRECORDUSER CLIP NAMEINITIALIZEPROPERTYEXIT(Continued on the next page)Preparations
