Panasonic NR-B32SW2 Operating Instructions Manual

Also see for NR-B29SG2: Service manual

Panasonic NR-B32SW2 Operating Instructions Manual Manual pdf 7 page image

7English7Installing the distance guidesTo prevent the condenser (the black backside component with fins)from touching the wall, put on two plastic distance guides in its placerotating 90°.CleaningAfter installation, wipe the appliance clean with warm water.Connecting the mains plug to the household mains socketYou can connect the mains plug immediately after installation.After the appliance is plugged, all symbols will appear for a moment, and then the startup values will appear as -18 °C onfreezer temperature display and 4 °C on fridge temperature display.All buttons on the control panel are touch-operated. (Only press to activate the button you want to operate.)Notes:• Cooling may take longer in the summer months or at other times when the room temperature is higher.• If you need to unplug the refrigerator, wait at least 10 minutes before you plug it back in again. If not, you might damagethe compressor.Ambient room temperatureYou’ll find your refrigerator’s climate classification on the rating plate in the left side of the fridge compartment. It showsthe room temperature the appliance is designed to work in.Climate classification Permitted ambient temperatureSN (Extended Temperate) +10 °C to 32 °CN (Temperate) +16 °C to 32 °CST (Subtropical) +16 °C to 38 °CT (Tropical) +16 °C to 43 °CFor saving energy1. Install the refrigerator in a dry, cool and well-ventilated location. The colder the ambient temperature, the better theefficiency. (Please refer to Page 6 for dimensions and clearance.)2. The combination of drawers and shelves that result in the largest in volume and the most efficient use of energy for therefrigerator.• Remove the top two freezer drawers. (Leave the lowest freezer drawer.)• Attach the drawers and shelves in the refrigerator to the positions illustrated on the section of “Parts” (P.8).• Removing the chill compartment drawer improves the cold air circulation. Also, larger amount of food can be stored.3. Set the Screen Saver Mode.4. Do not over fill the refrigerator to allow the air to circulate.5. Open the doors only when necessary and as briefly as possible.6. Occasionally clean the ventilation openings at the bottom of the refrigerator with a vacuum cleaner, etc.(Take care not to damage the refrigerant pipe inside the cover.)7. When setting to Super Freeze Mode or Super Cool Mode, power consumption will be increased.Distance guides (accessories)