Panasonic NP-6F2MUQNZ Operating And Installation Instructions

9Quick Operation GuideFor detailed operating method, read the corresponding content at Page 11-22.Operation Function description1. Switch ON the mainswitch.1. Switch ON the main switch on the wall.2. Fully open the Dishwasher door.2. Fill the DetergentDispenser.Compartment A: With each wash cycle.Compartment B: For programmes with pre-wash only.(Refer to Page 13)3. Check the rinse aidlevel.Rinse Aid indicator.Electric indicator on Control Panel. Follow to “When Refi llingthe Rinse Aid Dispenser”. (Refer to Page 14)4. Load the baskets.1. Scrape off any large amount of leftover food.2. Soften remnants of burnt food in pans, then load thebasket.3. Follow to the loading instructions. (Refer to Page 16)5. Select a programme.1. Fully close the Dishwasher door.2. Turn the Dishwasher to standby mode by pressing theOFF/ON button.3. Select desired programme by pressing the ProgrammeSelection button until the selected programme lights up.6. Running theDishwasher.Turn ON the water tap and press the Pause/Start button.The Dishwasher will start running.7. Switch OFF theDishwasher.1. When the working cycle has fi nished, the buzzer willsound 8 times before stop. “END” will be displayed afterthe washing cycle has completed.2. Turn OFF the Dishwasher by pressing the OFF/ONbutton.8. Turn OFF the watertap, unload the basket.1. Turn OFF the water tap.2. Start from the Lower Basket when unloading the dishes.3. Switch OFF the main switch on the wall.WARNINGWait for approximately 15 minutes before unloading the dishes to avoidhandling them while they are hot and susceptible to breakage.Using the Dishwasher