2 1FOOD PROCESSOR -SALAD DRAINER-Ingredient Preparations for Salad DrainerHow to Use: Salad Drainer32After inserting the Salad Drainer into the Bowl, insert theingredients into the Salad Drainer. Place the DrainerCover on top of the Salad Drainer until the mark alignsas shown in A. Turn the Drainer Cover anticlockwiseuntil the mark aligns as shown in B.Place the Bowl Lid on top of the Bowl and turn itclockwise until a 'click' sound is heard. Attach the Bowlassembly onto the Motor Housing as seen in page 9.Plug-in the plug into the socket and turn the RotarySwitch to select the speed required.After the processing is completed, return the RotarySwitch to OFF position "0" and unplug from the socket.Remove the Salad Drainer from the Bowl.Note:• Maximum working capacity of the Salad Drainer: 200 g or tilll maximum height of Salad Drainer, whichevercomes first.• Prohibited ingredients: refer to page 5.• Ensure that the ingredients are spread evenly around the Salad Drainer before processing.• Always ensure that the Drainer Cover is attached onto the Salad Drainer before operation, otherwise theingredients might come out and tear around the Bowl.• Depending on the speed and amount of ingredients used, there will be significant vibrations present. In thatcase, hold down on the Bowl Lid to support it during its operation.1 23 4Cut into 3 ~ 5 cm slices.Shredded to 1 ~ 3 mm.100 g1Drainer20 ~ 40 sec20 ~ 50 secFunction Speed Preparation MethodMax SingleUse Operating Time (approx.)31200 gLettuceLeavesIngredientCabbage211 2Note:Ensure that the Drive Shaft is protruding from theSalad Drainer after insertion.ABPPPP14