GB7EnglishElectrical Requirement (For UK market only)FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.This appliance is supplied with a moulded three pin mains plug for your safety andconvenience. A 13-amp fuse is fitted in this plug. Should the fuse need to be replacedplease ensure that the replacement fuse has a rating of 13-amp and that it is approved byASTA or BSI to BS1362.Check for the ASTA mark or the BSI mark on the body of the fuse. If the plugcontains a removable fuse cover, you must ensure that it is refitted when the fuse isreplaced. If you lose the fuse cover, the plug must not be used until a replacement coveris obtained.A replacement fuse cover can be purchased from your local Panasonic Dealer.If the fitted moulded plug is unsuitable for the socket outlet in your home, then the fuseshould be removed and the plug cut off and disposed of safety.There is a danger of severe electrical shock if the cut off plug is inserted into any 13-ampsocket.How to replace the fuseThe location of the fuse differs according to thetype of AC mains plug (figures A and B).Confirm the AC mains plug fitted and follow theinstructions below.Illustrations may differ from actual AC mains plug.Open the fuse cover with a screwdriver andreplace the fuse and close or attach the fuse cover.Figure A Figure BFuse cover100_160419_MK-F500_Second_EU(UZ50G155).indb 7 2016/04/19 16:58:34