Panasonic MJ-DJ31 Operating Instructions Manual

Contents

8HOW TO USEWash all detachable parts and dry well before using the appliance for the first time, refer to page 11.Unplug when assembling the unit. Before plugging in, ensure the Switch is switched to off.JUICERPlace the Container Unitonto the Motor Housing. Make sure the Spoutand the Clampspositioned samedirection as illustrated. Make sure the ContainerUnit sits properly on theMotor Housing.1 1 Attach the PulpContainer and makesure it is fullyaligned with thebody.2 Place the Spinnerin the ContainerUnit and fix it intoposition.3 Place the ContainerCover onto theContainer Unit.23 Push the Clamps asshown until a lockingsound is heard. If the Clamps arenot clampedcorrectly, the motorwill not operate.4 Place the Juice Jug asshown. Make sure the Spoutis in the downwardposition when juicing.Note:* The Spout can berotated freely for 120°when the Spout is in theupward position.Note:• Ingredients that are not recommended:Soft fruits that produce puree and can clog the Spinner – e.g. bananas, peaches, apricots etc.Low juice ingredients which can block the product – e.g. fresh basil leaf etc.• Please remove hard seeds and stones from fruit before juicing such as guava etc. Hard seeds that difficult to removefrom such as pomegranate is prohibited for juicing.• During initial usage, the appliances might have some unpleasant smell (slight burn smell) but this condition is normal.• Some ingredients may produce a lot of pulps accumulate to the Container Cover that cause operation stop.(CIRCUIT BREAKER PROTECTION: refer to page 7)• Make sure all parts are correctly mounted before you switch on the appliance.• Please use the Juice Jug with the Cup Cover to avoid juice splashing. Make sure to align the Juice Jug openingto the Spout when juicing.• Speed 2 is suitable for hard type fruits e.g. apples, carrots etc. while speed 1 is suitable for softer type fruits e.g.watermelons.5 1 Plug in and switch on.2 Insert the ingredients oneby one and push themslowly into the Feeding Tubeusing the Food Pusher.3 Align the Food Pusher intothe Feeding Tube asillustrated.6 After use, switch off andunplug. While removing theJuice Jug, ensurethe Spout is pulledup to prevent juicefrom dripping. Ensure the Spinneris fully stoppedbefore release theClamps.100012501500mL750500250ozfl535040302010120°100012501500mL750500250ozfl535040302010100012501500mL750500250ozfl535040302010123 Some pulp might be hard to collect in the PulpContainer and stick on the Container Coverdepending on the ingredients and amount.123