Panasonic M41A1G4L Operating Instructions Manual

Contents

2018/6■AQCTB02E 201806-EContact to :• Printed colors may be slightly different from the actual products.• Specifications and design of the products are subject to change without notice for the product improvement.RepairURLConsult to the dealer from whom you have purchased this product for details of repair work.When the product is incorporated to the machine you have purchased, consult to the machinemanufacturer or its dealer.• Technical information of this product (Operating Instructions, CAD data, Inquiries) can be downloadedfrom the following web site.COMPACT AC GEARED MOTOR1-1 Morofuku 7-chome, Daito, Osaka 574-0044, JapanTel : +81-72-871-1212Fax: +81-72-870-3151The contents of this catalog applyto the products as of June 2018. This product is for industrial equipment. Don't use this product at general household.• Important Notes on exporting this product or equipment containing this product;If the end-user or application of this product is related to military affairs or weapons, its export may be controlled by “ForeignExchange and Foreign Trade Control Law” of Japan where export license will be required before product can be exported fromJapan.• This product is designed and manufactured for use in General Purpose Industrial Equipment and it is not intended to be usedin equipment or system that may cause personal injury or death.• All servicing such as installation, wiring, operation, maintenance and etc., should be performed by qualified personnel only.• Tighten mounting screws with an adequate torque by taking into consideration strength of the screws and the characteristics ofmaterial to which the product will be mounted. Over tightening can damage the screw and/or material; under tightening canresult in loosening.*Example: apply 2.7 N·m – 3.3 N·m torque when tightening steel screw (M5) to steel surface.• Install safety equipment to prevent serious accidents or loss that is expected in case of failure of this product.• Consult us before using this product under such special conditions and environments as nuclear energy control, aerospace,transportation, medical equipment, various safety equipments or equipments which require a lesser air contamination.• We have been making the best effort to ensure the highest quality of our products, however, some applications withexceptionally large external noise disturbance and static electricity, or failure in input power, wiring and components may resultin unexpected action. It is highly recommended that you make a fail-safe design and secure the safety in the operative range.• If the motor shaft is not electrically grounded, it may cause an electrolytic corrosion to the bearing, depending on the conditionof the machine and its mounting environment, and may result in the bearing noise. Checking and verification by customer isrequired.• Failure of this product depending on its content may generate smoke of about one cigarette. Take this into consideration whenthe application of the machine is clean room related.• Please be careful when using the product in an environment with high concentrations of sulfur or sulfuric gases, as sulfurationcan lead to disconnection from the chip resistor or a poor contact connection.• Do not input a supply voltage which significantly exceeds the rated range to the power supply of this product. Failure to heedthis caution may lead to damage of the internal parts, causing smoke and/or fire and other troubles.• The user is responsible for matching between machine and components in terms of configuration, dimensions, life expectancy,characteristics, when installing the machine or changing specification of the machine. The user is also responsible forcomplying with applicable laws and regulations.• Manufacturer’s warranty will be invalid if the product has been used outside its stated specifications.• Component parts are subject to minor change to improve performance.• Read and observe the instruction manual to ensure correct use of the product.