79VQT1U32Advanced (Recording pictures)[REC] mode:Setting the Light SensitivityThis allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figureenables pictures to be taken even in dark places without the resulting pictures coming outdark.Press 3 ( ).Press 3/4/2/1 to select the ISO sensitivity andthen press [MENU/SET] to set.• You can also use the front dial to set.• You can also press the shutter button halfway to set.¢ When the [ISO LIMIT SET] of [REC] mode menu (P104) is set to anything except [OFF],it is set automatically within the value set in [ISO LIMIT SET].It is set as following when the [ISO LIMIT SET] is set to [OFF].• When setting to [AUTO], ISO sensitivity will adjust automatically depending on brightnesswithin the maximum setting of [ISO400].• When setting to [ ], ISO sensitivity will adjust automatically depending on brightnesswithin the maximum setting of [ISO800]. ([ISO400] when the flash is used)∫ About [ ] (Intelligent ISO sensitivity control)The camera automatically sets the optimum ISO sensitivity and shutter speed to suit themovement of the subject and brightness of the scene to minimize the jitter of the subject.• The shutter speed is not fixed when the shutter button is pressed halfway. It is continuouslychanging to match the movement of the subject until the shutter button is pressed fully. Confirmthe actual shutter speed on the information display for the picture being played back.ISO sensitivity 100 3200Recording location(recommended) When it is light (outdoors) When it is darkShutter speed Slow FastNoise Less IncreasedISO sensitivity SettingsAUTO¢ The ISO sensitivity is automatically adjusted according to thebrightness.¢(Intelligent)The ISO sensitivity is adjusted according to the movement ofthe subject and the brightness.100/200/400/800/1600/3200The ISO sensitivity is fixed to various settings.(When the [ISO INCREMENTS] in [REC] mode menu(P104) is set to [1/3 EV], items of ISO sensitivity that canbe set will increase.)