Panasonic KY-B84AX Installation Instructions Manual

Also see for KY-B84AG: Operating instructions Installation instructions

Contents

2 3WARNING: Failure to follow these instructions may causedeath or serious injury.- When performing the installation, follow these instructionsproperly. Improper installation may cause an electric leakage orfire.- Install 240 V / 40 A dedicated single phase circuit with theearth leakage circuit breaker for the power supply. Theelectrical wiring may abnormally overheat if the dedicated circuit isnot properly connected.- Electrical work must be performed by a legally qualifiedelectrician. Improper wire connections may cause electricleakages or fires.- Ground the appliance following the electric laws. Failure to doso may cause electric shock due to electric leakages.CAUTION: Failure to follow these instructions may causeinjury or property damage.- Use heat resistant materials for the countertop. However, donot use varnished materials as they might get discolored.The material of the countertop should have heat resistancy equalto or exceeding “laminated thermosetting high-pressure decorativesheets”. If the materials are not heat resistant, they may getdeformed or cause a fire.Please fully observe the following safety precautions.IMPORTANT- Install the appliance in accordance with the InstallationInstructions. Otherwise, the performance of the appliancemay be affected.- Make sure to perform a test run and explain to the customerhow to properly use the appliance.- Proper installation is the responsibility of the installer. Anymalfunction or accident resulting from the failure to followInstallation Instructions is not covered under guarantee.- Hand these Installation Instructions to the customer for thelocal electrical inspector’s use.- Have a qualified electrician ground the appliance. Impropergrounding may cause an electric shock.- Before performing the installation, definitely turn off thecircuit breaker. This can prevent electric shock.- The power cord must be accurately connected to ensure theintegrity of the connection. Improper wire connections maycause electric leakages or fires.- If the power cord is damaged, it must be replaced by themanufacturer or its service agent or a similar qualified person inorder to avoid a hazard.- Do not disassemble, repair or modify the appliance (thetop plate, for example). Doing so may cause the appliance tooperate abnormally and may result in danger.- Do not step on the appliance, or drop heavy items on top ofit. Cracks in the top plate may cause overheating, malfunctions orelectric shocks.- Do not touch high temperature parts, such as the top plate.Safety Precautions