Panasonic KY-A227E Operating & Installation Instructions Manual

27Installation26Dimensions (unit: mm)WARNINGTo avoid fire, electric leakage, electric shock orabnormal operationSafety PrecautionsCAUTIONTo avoid fire, deformation or discolouration■ Use a heat resistant material for the countertop.( Heat resistance equal to or exceeding that of “laminatedthermosetting high-pressure decorative sheets”)■ Do not use a varnished material for the countertop.■ If the power cord is damaged, it must be replaced by themanufacturer, its service agent or a qualified person in order toavoid hazards.■ Electrical work must be performed by a legally certified electrician.■ Before installation, make sure to turn off the circuit breaker.■ Install a 230-240 V / 13 A dedicated single-phase circuit with anearth leakage circuit breaker for the power supply to avoidabnormal overheating of the electric wire.■ This appliance must be properly earthed following the electric laws.■ The earth line must not be connected to a gas pipe, water pipe,earth of lightning rod or telephone.■ The power cord must be correctly connected to ensure the integrityof the connection.■ Do not step on the appliance, or drop heavy items on top of it.■ Do not disassemble, repair or modify the appliance.(Ex. Disassembling the top plate)■Top view380Intake vent (on the undersurface)Ø 190Ø 190181400229742Exhaust vent■Side viewApprox. 1.5 m6 18 364Intake ventRelated Dimensions (Built-in)■Countertop cutoutCabinet front710 +3−0R3 +− 1368 +3−0 Template providedwith the appliance■CabinetCountertop with bulge in frontBulge More than 25 mmfor flat partDo not install unless thecondition above is met. *The clearance for the intake has to be more than 40 cm².More than 470IntakeMorethan 6*(12 - 30)368 +3−0 (Depth of mounting hole)Exhaust ventFlow from intake to exhaust■If a partition board without an intake part has been setPartition boardCountertop Cut(More than 100)Make holes.(Approx. Ø 100×8)or■Front view● KY-C227E model10170518.5 107● KY-A227E model877059318.5