Panasonic KX-WT125 Operating Instructions Manual

Also see for KX-WT125: Brochure & specs Brochure & specs Operating instructions

Contents

Panasonic KX-WT125 Operating Instructions Manual Manual pdf 6 page image

Before Initial Use6Charging the BatteriesAt the time of shipment, the batteries are not charged. Please charge the batteriesfor about 7 hours before using the handset for the first time.• When the batteries are fully charged, the charge indicatorgoes off and " " is displayed. For more information, see"Battery Information" on page 74.• It is normal for the handset and charger to feel warm whilethe batteries are charging.• Keep devices sensitive to magnetic fields away from thecharger.• Use only the included charger.Charger Wall Mounting25 mm(1 in)for charger1. Install the two screws in the wall, spacing them 25 mm (1 in) apart.WasherDrive the screwto this point.25 mm(1 in)Screws(Included)2. Mount the charger securely on the wall.• Please copy this page and use as a reference for wall mounting.Make sure to set the print size to correspond with the size of this page. If thedimension of the paper output still deviates slightly from the measurementindicated here, use the measurement indicated here.• When mounting the charger, ensure that the correct screws are used for the typeof wall.• Make sure that the wall that the charger will be attached to is strong enough tosupport the total weight of the handset and charger (approx. 190 g [0.4 lb]). If not,it is necessary for the wall to be reinforced.• When this product is no longer in use, make sure to detach it from the wall.• When inserting screws, avoid pipes and electrical cables, etc, that may bepresent/buried.• The screw heads should not be flush to the wall.• Certain types of wall may require plugs to be anchored in the wall before thescrews are inserted.