Panasonic KX-TG9541C Quick Manual

Also see for 2 Line KX-TG9541C: Operating instructions

4Link to cellYou can use the unit to make or answer calls using a cellular line. Your cellular phones must haveBluetooth ® wireless technology that is compatible with this product. For more details, please visit our Website: http://www.panasonic.ca/link2cellL Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during acellular call, you may hear noise. For best performance, we recommend placing the cellular phonebetween 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.1 Cell line2 Cell phone service providersPairing a Bluetooth cellular phone (Handset/Base unit)1 For CELL 1: {MENU}(6241For CELL 2: {MENU}(6242For CELL 3: {MENU}(6243For CELL 4: {MENU}(6244L After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure mustbe completed within 5 minutes.2 Your cellular phone:While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enterthe pairing mode.L Depending on your cellular phone, it may ask you to enter the base unit PIN (default: “0000”).3 Wait until a long beep sounds.L It may take more than 10 seconds to complete pairing.L When the CELL indicator lights up, the cellular phone is connected to the base unit. You are ready tomake cellular calls.4 Proceed with the operation for your unit.Handset: {OFF}Base unit: {EXIT}Note:L Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellularphone’s operating instructions.TrademarksL The Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks byPanasonic Corporation is under licence. All other trademarks identified herein are the property of theirrespective owners.12TG9541C_(en-en)_QG.fm Page 4 Thursday, June 27, 2013 2:46 PM