2.12 [6] Feature598 PC Programming Manual2.12 [6] Feature2.12.1 [6-1] System Speed DialThe System Speed Dialing Table is used to store frequently dialed numbers as well as callers whoshould be automatically routed to certain extensions when they call (Calling Line Identification [CLI]distribution). The System Speed Dialing Table is available for all extension users when making orreceiving a call.A maximum of 1000 System Speed Dialing numbers (e.g., telephone numbers, feature numbers) canbe programmed with other related parameters. 100 numbers are displayed at a time. To display othersets of numbers, click the applicable tab.MemorySelects the System Speed Dialing Table to be programmed. Whether a tenant uses the basic SystemSpeed Dialing Table or the additional table (with MEC [KX-TDA50/KX-TDA100/KX-TDA200] or EMEC[KX-TDA600] card) depends on the setting of System Speed Dial in 2.12.6 [6-6] Tenant.DefaultBasic MemoryValue RangeFor KX-TDA50:Basic Memory: the standard tableExpanded Memory: additional table (only available when an MEC card is installed to the PBX)For KX-TDA100/KX-TDA200/KX-TDA600:Basic Memory: the standard tableExpanded Memory for Tenant 1–8: additional tables (only available when an MEC/EMEC card isinstalled to the PBX)Maintenance Console Location2.12.1 [6-1] System Speed DialProgramming Manual References2.12.6 [6-6] Tenant—System Speed DialFeature Manual References1.16.4 Speed Dialing, System1.17.3 Tenant ServiceNameSpecifies a name for the System Speed Dialing number.DefaultNot stored.
