1.7 Setting the Telephone According to Your NeedsUser Manual 1011.7.13 Clearing Features Set at Your Extension (ExtensionFeature Clear)You can reset the settings of the following features on your extension to the default settings with oneoperation.This feature is also known as Station Programme Clear.* These features may not be reset depending on the system programming.Features Default SettingHot Line* OffMessage Waiting—(All the messages that have been left by other extension users) OffCall Pickup Deny AllowCall Forwarding (FWD)* OffAbsent Message OffPaging Deny AllowTimed Reminder ClearedDo Not Disturb (DND)* OffCall Waiting for intercom calls* Disable (No call)Call Waiting for outside calls* Disable (Notone)Executive Busy Override Deny AllowBGM OffData Line Security OffParallelled Telephone The telephone inparallel rings.Log-in/Log-out Log-in• For Users in Canada Only:After performing Extension Feature Clear, the setting of Call Waiting becomes "Enable(Tone)". In this case, dial tone 2 will be heard when you go off-hook.Off-hook. On-hook.PT/SLT/PSEnter790.9 07 C.Tone