Panasonic KX-TDA30 Manual

Also see for HYBRID IP-PBX KX-TDA100: User guide User guide Technical information Technical information Features guide

Panasonic KX-TDA30 Manual Manual pdf 34 page image

4.1 Programming the IP-EXT Card4.1.1 Assigning the IP Addressing InformationWhen an IP-EXT card is placed on the LAN for the first time, it is necessary to assign IP addressing informationto the card. This is done by using the Maintenance Console.Note• It is assumed that you have already installed the Maintenance Console on your PC.• The contents and design of the software are subject to change without notice.• Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.1. Start the Maintenance Console from the Start menu.2. "Information before programming" appears.a. Carefully read this important additional information,which includes updates to this and other manuals.b. Click OK to close this window.3. a. Enter the Installer Level Programmer Code (default: IN-STALLER).b. Click OK.4. Click Connect.5. a. Select your PBX model from PBX Model.b. Select the USB tab.c. Enter the system password for installer (default: 1234).d. Click Connect.The system menu appears.6. a. Under Configuration, click Slot.b. Move the mouse pointer over the IP-EXT card. A menuwill be shown under the mouse pointer.c. Click OUS to set the card to out-of-service status.d. Move the mouse pointer over the IP-EXT card, then clickCard Property.34 Information about IP Proprietary Telephones4.1.1 Assigning the IP Addressing Information