Panasonic KX-TD816 Programming Manual

Also see for KX-TD1232: Operating instructions Operating instructions Installation manual Technical advisory User manual

Contents

Panasonic KX-TD816 Programming Manual Manual pdf 41 page image

2.1 Manager ProgrammingGeneral Programming 41[006] Operator / Manager Extension AssignmentDescriptionAssigns the jack number for a manager and/or operators. The manager extension can performSystem Programming and manager services. The operators have the ability to perform operatorservices.Selection• OPE-1 (operator 1) / OPE-2 (operator 2) / MNGER (manager)• Jack number:KX-TD816 – 01 through 16KX-TD1232 – 01 through 64DefaultOperator 1 – Jack 01;Operator 2 and Manager – Not storedProgramming1. Enter 006.Display: 006 OP-1, 2, MGR2. Press NEXT to programme operator 1.Display: OPE-1:Jack01To programme another item, you can also keep pressing NEXT or PREV until thedesired one is displayed.3. Enter a jack number.To assign no operator or manager, press CLEAR.To change the current entry, press CLEAR and enter the new jack number.4. Press STORE.5. To programme another item, press NEXT or PREV.6. Repeat steps 3 through 5.7. Press END.Conditions• Up to two operators and a manager can be programmed.• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through64 are for the Slave, if available.• The manager cannot be assigned the jack number of the Console Port set in programme[007] Console Port and Paired Telephone Assignment.