• **: To hold the current call temporarily, press the HOLD button.To return to the held call,press the line key whose indicator light flashes green slowly.**: If you lift the handset to monitor a message recording, the caller will be able to hearyou. Even in this case, the message will still be recorded.• The shaded areas are for the Hands-free operation.Operations 2-7Telephone Features 2.2While a caller is leaving a message in your mailbox, you can monitor the message. If desired,you can answer the call while monitoring. There are 2 methods available. In both modes,when you are having a conversation, you will hear Call Waiting tone if Call Waiting has beenenabled.Hands-free Mode: You can monitor messages automatically through the telephone speaker atthe same time.Private Mode: You will hear an alert tone while the caller is leaving a message.Preparation• Assign the Live Call Screening (LCS) button• Select the mode, either Hands-free or Private• Set the Password• Set the LCS featureFlowchart of the Live Call Screening (LCS) FeatureHang up*.Press the RECALL orthe LCS Cancel button.Press the LCS or theSP-PHONE button.Lift the handset.(Call Waiting Tone)To stop monitoring To stop monitoringTo answer the callPress the RECALL orthe LCS Cancel button.Hang up.Press the SP-PHONE/MONITORor LCS button.**To stop the alert toneTo monitorTo monitorTo set LCS on• Press the LCS button.• Enter the password. To cancel LCSPress the LCS button.Press the RECALL orLCS Cancel button.(No operation)Hands-free Mode Private ModeDuring a conversation(Alert Tone)Live Call Screening (LCS)