Panasonic KX-TA624 Installation Manual

Also see for KX-TA624: User guide Feature manual Programming manual User guide Manual

Contents

Panasonic KX-TA624 Installation Manual Manual pdf 339 page image

4.2 System ProgrammingSMDR Parameter801System Programming 4-125Description Used to match the SMDR output to the paper size being used in theprinter. The page length determines the number of lines per page.The skip perforation determines the number of lines to be skippedat the end of every page.Selection • Page length (lines): 4 – 99• Skip perforation (lines): 0 – 95Default Page length – 66; Skip perforation – 0Programming 1. Enter 801.Display: SMDR Parameter2. Press NEXT to program the page length.Display example: Page Length:663. Enter the page length.To change the current entry, press CLEAR and enter the new pagelength.4. Press STORE.5. Press NEXT to program the skip perforation.Display example: Skip Perf: 06. Enter the skip perforation.To change the current entry, press CLEAR and enter the new skipperforation.7. Press STORE.8. Press END.Conditions • The page length should be at least four lines longer than the skipperforation length.• The title is placed on the first three lines of every page.• The programmed format becomes valid only if the Serial Interface(RS-232C) cable is connected. If a printer is already connected,disconnect it and connect again. Otherwise the previous format will beused.Feature Reference Section 3, FeaturesStation Message Detail Recording (SMDR)