Panasonic KX-TA30820B User Manual

Also see for KX-TA308: Operating instructions User guide User guide Specifications Operating instructions

Contents

Panasonic KX-TA30820B User Manual Manual pdf 71 page image

Telephone Features 3-173.2 Telephone Features C• When you dial line access code “9”:• When you dial line access code “81 through 83”:outside (CO) line group number• The FWD/DND indicator flashes red slowly.FWD(All) CO GxFWD(All) All COsCall Forwarding — to an Outside (CO) LineYou can forward calls to an external party.System programming is required to execute this feature.SettingConditions• If an incoming outside call is forwarded to an outside (CO) line, the “Outside-to-Outside (CO-to-CO) Line Call Duration Time” is applied to the call and the line will bedisconnected when it expires (default: 10 minutes). An alarm tone is sent to bothparties fifteen seconds before the assigned duration time limit.• Up to thirty-two digits (including the line access code) can be programmed.• If a CPC signal is sent to an outside (CO) line before the assigned duration time limit, acall between two external parties will be disconnected.• This feature cannot be used for incoming outside calls from lines assigned as“Normal”, by System Programming.• An account code must be entered by pressing “ ” and entering the account codeafter the line access code in the account code verify-all and forced modes.Programming References• System Programming — Installation Manual[205] Outside-to-Outside (CO-to-CO) Line Duration Time Limit[414]–[416] Outside (CO) Line Mode — Day/Night/Lunch[605] Account Code Entry Mode[607] Call Forwarding to an Outside (CO) LinePT and SLTFor a PT: Press FWD/DND.For an SLT: Dial 71.Enter the lineaccess code(9 or 81 through 83) .Enter thephone number.Dial #.For an SLTDial 3.line access code phone no.Lift the handsetor pressSP-PHONE/MONITOR.Hang up or pressSP-PHONE/MONITOR.Confirmationtone anddial toneFor a PT17FWD/DND3