3-116 Telephone FeaturesT 3.2 Telephone FeaturesToll Restriction for System Speed DialingAllows you to change the toll restriction in “System Speed Dialing”. Normally, callsoriginated by “System Speed Dialing” are restricted depending on the extension’s tollrestriction COS number. Once this option is set, the COS number is changed to the oneassigned in the program [301]. You can select the toll restriction COS number by SystemProgramming.Programming Reference• System Programming — Installation Manual[301] Toll Restriction — System Speed Dialing Boundary ClassFeature ReferencesSystem Speed DialingToll Restriction (→ See the Installation Manual.)Toll Restriction — Station Lock Boundary ClassAllows assigning a toll restriction class when the Electronic Station Lockout feature isset.You usually cannot make an outside call at a locked extension, however if a tollrestriction class is assigned in program [312], you can make an outside call at the lockedextension.Conditions• The higher toll restriction COS number will take precedence.For example, if toll restriction COS number 3 is assigned to an extension and thestation lock boundary class is 4, you are allowed to make a call with toll restrictionCOS 4.Programming Reference• System Programming — Installation Manual[312] Toll Restriction — Station Lock Boundary ClassFeature ReferencesElectronic Station LockoutToll Restriction (→ See the Installation Manual.)
