3-14 Telephone FeaturesC 3.2 Telephone FeaturesCall Forwarding — SUMMARYAutomatically transfers incoming calls to another extension or to an external destination.The following types are available.Type DescriptionCall Forwarding— All CallsCall Forwarding— Busy/No AnswerCall Forwarding— to Outside (CO) LineCall Forwarding— Follow MeAll incoming calls are forwarded to another extension.All incoming calls are forwarded to another extensionwhen you do not answer or your extension is busy.All incoming calls are forwarded to an outside (CO) line.Allows you to set the “Call Forwarding — All Calls”feature from another extension.Conditions• To cancel the Call Forwarding features, refer to “Call Forwarding — CANCEL” in thismanual.• Call Forwarding can only be extended to one target telephone. For example, extensionA is forwarded to extension B, and if extension B tries to set Call Forwarding toextension C, an alarm tone will be heard and the setting will be rejected.If extension B has already set Call Forwarding to extension C, and extension A tries toset Call Forwarding to extension B, the setting will be also rejected.• If the destination extension has already set “Do Not Disturb”, you cannot forward anycalls to the extension.• Setting a new “Call Forwarding” feature (All Calls, Busy/No Answer, etc.) cancels anyother “Call Forwarding” features or the “Do Not Disturb (DND)” feature.• If your entry is valid, confirmation tone 1 (one beep) is sent. If your entry is the sameas previously programmed data, confirmation tone 2 (two beeps) is sent. Refer to the“Tone List” in the Appendix (Section 4).• You can call the original extension from the Call Forwarding destination extension.(For example, Boss Secretary)• Camp-On recall and Hold recall are not forwarded.Ext AExt B Ext C(Yes) Ext AExt B Ext C(Yes)
