27System Programming7 [A] [BB] [CC] [D]1997 [A]0[A] [B]16Door Opener AssignmentDescriptionAssigns each extension to have access to door opener or not.Input FormatExplanation• [A]= 1 through 6 (corresponding to extension no. 21 through 26)• [B]= 0: DISABLE/ 1: ENABLEDefault All extensions– 1: ENABLEDay/Night Switching ModeDescriptionAssigns automatic or manual day/night mode.Condition• If automatic switching mode is assigned, day/night mode is switched at the timeprogrammed in “#71 Day/Night Starting Time”.Input FormatExplanation• [A]= 0: Manual/ 1: AutomaticDefault 0: ManualDay/Night Starting TimeDescriptionSets the starting time when automatic day/night mode is programmed in the “#70 Day/Night Switching Mode” program.Input FormatExplanation• [A]= 1: Day start time / 2: Night start time • [BB]= Hour: 01-12• [CC]=Minute: 00-59 • [D]=0: AM / 1: PMDefault Day– 9:00 AM Night–5:30 PMSystem Data ClearDescriptionAllows the system to re-initialize the system-programmed data. The features mentioned in“Station Feature Clear” are also re-initialized. See page 11 of the User Manual. When allthe programmed data is cleared, the system will restart with the default setting.Input Format