Panasonic KX-NT700 Operating Instructions Manual

Also see for VoiceSonic KX-NT700: Specifications Quick reference guide Operating instructions Quick reference guide Operating instructions

Contents

camera's IP address and port numberautomatically by following the procedurebelow.1. Click [Search].• A list of up to 10 network camerasconnected to the LAN is displayedin the [Choose Network Camera]dialogue box.2. Select the desired network camera andclick [Choose].• The selected network camera's IPaddress and port number aredisplayed in the [IP Address] and[Port Number (MotionJPEG)]fields.4. If necessary, set [Get Network Camerainformation from a Unit when CPM starts].• If the checkbox is checkedNetwork camera settings are automaticallyobtained from the unit when CPM is started.Settings registered on CPM are overwritten bythe settings obtained from the unit.• If the checkbox is uncheckedNetwork camera settings are not obtained fromthe unit when CPM is started. Settingsregistered on CPM are used for videoconferencing.5. Click [OK].A confirmation dialogue box is displayed to checkwhether it is OK to save the stored network settingson the unit.Click [Yes] to save the settings to the unit.Click [No] to not save the settings to the unit.Using with a NetworkCameraBefore using CPM with a network camera, it isnecessary to connect a network camera (soldseparately) to the same LAN as your computer, andregister the network camera (see Page 51).Creating a Video Conference1. Make a call to the other party using an IP line (seePage 37).• The [Video Conference] screen is displayed.Note• If the Video Conference screen is notdisplayed when making a call, or if youclosed the screen once, clickon the right side of theMain screen.52 Operating Instructions for Conferencing Phone Manager Document Version 2010/02Using with a Network Camera