Panasonic KX-MB2061CXB Service Manual

Also see for KX-MB2061CXB: Operating instructions

110KX-MB2061CXB/KX-MB2061CX2/KX-MB2062CXB8.4. ConnectionsCaution:• When you operate this product, the power outlet should be near the product and easily accessible.• Be sure to use the telephone line cord supplied with this unit.• Do not extend the telephone line cord.8.4.1. Base Unit(1) Power cord• Connect to a power outlet.(220-240 V, 50/60 Hz).(2) Telephone line cord• Connect to a single telephone line jack.(3) To the Internet(4) Network router/Network hub (not supplied)• Also connect networked computers.(5) LAN cable (not supplied)• To assure continued emission limit compliance, use only shielded LAN cable (category 5 straight cable).Important notice for the USB connection• DO NOT CONNECT THE UNIT TO A COMPUTER WITH THE USB CABLE UNTIL PROMPTED TO DO SO DURING THESETUP OF MULTI-FUNCTION STATION.Note:• Do not place any objects within 10 cm of the right, left and back sides of the base unit.• If any other device is connected to the same telephone line, this unit may disturb the network condition of the device.• If you use the unit with a computer and your internet provider instructs you to install a filter (6), please connect it as follows.Using network router/network hub• We recommend using network routers/network hubs (4) under secure network environments. Consult your network administratorfor firewall settings, etc.• The warranty does not cover damage due to security problems or any inconveniences relating to it.