Panasonic KX-HNC200 Installation Manual

Also see for KX-HNC200: Quick setup User guide Installation guide Installation guide

Contents

Panasonic KX-HNC200 Installation Manual Manual pdf 11 page image

Wall mountingR Mount the camera on the stable locationwhere the unit can be adequatelysupported when installing.R The AC adaptor should be connected to avertically oriented or floor-mounted ACoutlet. Do not connect the AC adaptor to aceiling-mounted AC outlet, as the weight ofthe adaptor may cause it to becomedisconnected.R Do not mount the camera on a softmaterial. It may fall down, break or causeinjury.R Do not mount the camera on the followingplaces: plaster board, ALC (autoclavedlightweight cellular concrete), concreteblock, plywood less than 25 mm (1 inch)thick, and etc.1 Drive the screws (not supplied) into thewall.1Longer than 20 mm (25/32 inches)2Space 1.3 mm (1/32 inches)1 2Note:R Use the following template whendetermining the location of the screwholes.(1 3/32 inches)28 mm2 Mount the camera to the wall.1Screws228 mm (1 3/32 inches)213 Adjust the angle of the camera.For assistance, please visit www.panasonic.com/support 11Setup