Panasonic KX-HN3001 Operating Instructions Manual

Also see for KX-HN3001: Manual Operating instructions User manual

TroubleshootingGeneral useProblem Cause & SolutionThe monitor unit doesnot work.R Make sure the battery is installed correctly (page 14).R Fully charge the battery.The camera unit doesnot work.R Make sure the AC adaptor is connected to the camera unit andpower outlet (page 12).The monitor unit isturned off.R Press M N located on the top of the monitor unit for about 2seconds.Noise is heard, soundcuts in and out.R You are using the monitor unit or camera unit in an area withhigh electrical interference. Re-position the monitor unit and usethe camera unit away from sources of interference.The monitor unit orcamera unit does notsound.R The speaker volume is turned off. Adjust the speaker volume(page 20).Monitor unit displayProblem Cause & SolutionThe display is in alanguage I cannot read.R Change the display language setting (page 16).is displayed. R The monitor unit is too far from the camera unit. Move themonitor unit closer to the camera unit.R The camera unit’s AC adaptor is not properly connected.Reconnect the AC adaptor to the camera unit.R The camera unit has not been registered to the monitor unit.Register the camera unit (page 28).The monitor unit displayis blank.R The monitor unit is in sleep mode. Press any button on themonitor unit to activate the display.R The monitor unit is not turned on. Turn it on (page 16).Images are white orblack.R The brightness of the display is not correctly adjusted. Adjust thebrightness when images are displayed (page 20).R Place the camera unit in a different location or position.Images are flickering. R AC (alternating current) lights such as fluorescent lights maycause flickering in dark environments. (This is not a malfunction.)For assistance, please visit http://shop.panasonic.com/support 29Useful Information