Menu
Panasonic KX-FLB881E Quick Reference Manual
Also see for KX-FLB881E: Operating instructions
                        |
1. Introduction and Preparation15Detailed operating instructions are on the CD-ROM.Important:L Consult your network administrator when settingthe IP address, subnet mask, and defaultgateway.1.12.1 Setting up automatically with aDHCP serverYour situation:– When only one unit is connected to the LAN.If your network administrator manages the network witha DHCP (Dynamic Host Configuration Protocol) server, itwill automatically assign an IP (Internet Protocol)address, subnet mask, and default gateway to the unit.1 After connecting the LAN cable to the unit and thecomputer, connect the mains lead.L The IP address, subnet mask, and defaultgateway will be set automatically.2 Install Multi-Function Station on the computer thatyou want to use it with.1.13 Installing Multi-FunctionStationL Install Multi-Function Station (CD-ROM) beforeconnecting the unit to a computer with USBcable. If the unit is connected to a computer withUSB cable before installing Multi-FunctionStation, the [Found New Hardware Wizard]dialogue box will appear. Click [Cancel] to closeit.L Software features and appearance are subject tochange without notice.Warning:L To assure continued emission limit compliance;– use only shielded USB cable.– use only shielded LAN cable (category 5 straightcable).1 Start Windows ® and exit all other applications.L For Windows 2000, Windows XP and WindowsVista™ operating system users, you must belogged in as an administrator in order to installMulti-Function Station.2 Insert the supplied CD-ROM into your CD-ROMdrive.3 [Easy installation]L The installation will start.4 When the setup program starts, follow the on-screeninstructions.5 The [Connect Type] dialogue box appears.For USB connection:1. [Connect directly with a USB cable.] i [Next]L The [Connect Device] dialogue box will appear.2. Connect the unit with the USB cable (1), then click[Next].3. Click [Install], then follow the on-screeninstructions.L The files will be copied to your computer.For LAN connection:1. [Connect via the Network.] i [Next]L The [Select a Network Device] dialogue boxwill appear.2. Check [Select in the searched list] and select theunit from the list.3. [Next]4. Click [Install], then follow the on-screeninstructions.L The files will be copied to your computer.To view or install the operating instructions in theCD-ROM1. Start Windows and insert the supplied CD-ROM intoyour CD-ROM drive.2. Click [Operating Instructions], then follow the on-screen instructions to view or install the operatinginstructions in PDF format.L Adobe Reader is required to view them.Note:L If you install the operating instructions, you can viewit anytime from [o] on the Multi-Function Stationlauncher.Important noticeIf you use Windows XP or Windows Vista, a messagemay appear after connecting the unit with the USBcable. This is normal and the software will not causeany difficulties with your operating system. You cancontinue the installation with no problem. This kind ofmessage is displayed:L For Windows XP users“The software you are installing for this hardwarehas not passed Windows Logo testing to verify itscompatibility with Windows XP.”L For Windows Vista users“Would you like to install this device software?”1 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved