Panasonic GA-AS12TPoE+ Series Installation Manual

Also see for GA-AS10T PN25101-ID: Instruction manual Installation guide

Contents

Panasonic GA-AS12TPoE+ Series Installation Manual Manual pdf 15 page image

3.4 Configuration of IP address (Basic)15(1) Directly connect the computer which has ZEQUO assist Plus installed on it fromthe CD-ROM and this device via twisted pair cables, or connect the computerand this device to the TCP/IP network in the broadcast domain which the L3switch routers do not go through, and start up ZEQUO assist Plus.(2) From the list on the left side of the screen, click the "IP Address Easy Setup"button to display the screen shown in Screen 1.(3) Press the "Search" button. This application starts searching for Switching Hubswithin the broadcast domain. In a few seconds, the screen displays the list ofdetected Switching Hubs. (Screen 2)(4) From the list of the detected Switching Hubs, select a device that you want toconfigure. In the "Setting item" field in the lower part of the screen, configure"Network setting", "Switch name", and other items.(5) Fill in the setting items and press the "Setting execution" button to display theconfirmation screen shown in Screen3. Press "Yes" to configure the settings and"No" to cancel them.(6) After the settings are reflected into the device correctly, the message shown inScreen4 appears indicating the completion of the settings. If an error messageappears, you should search for them again or check the network.Screen 1

/ 18

Related manuals for Panasonic GA-AS10T PN25101-ID