Panasonic FD-FR061 Operating Instructions Manual

20Safety precautions Always observe these precautionsThese safety precautions are provided for your protection. Please read and follow them carefully to avoid personalinjury or damage to the product itself or other properties.The following symbols differentiate the levels of danger and injury that may result if the product is notused correctly as instructed.WARNING This symbol indicates thatimproper handling may causea risk of death or serious injury. CAUTIONThis symbol indicates thatimproper handling may cause arisk of injury or damage to theproduct or to your properties.This manual uses a number of other symbols to indicate additional information.(The symbols given below are examples.)This symbol indicates an action that must notbe performed.This symbol indicates an action that must beperformed.To prevent accidents such as fires and electric shocksWARNINGIn case of any problem or failure,stop using the product immediatelyand disconnect the power plug.(Otherwise, electric shock, fire or smoke may occur.)• Moving the power cord stops operation.• Abnormal noise or vibration is observedduring operation.• The product becomes abnormally hot orburning smell is observed.→ Immediately stop operation, disconnect the powerplug and contact an authorized service center (asdescribed in the warranty) for a check or repair.Do not touch the power plug withwet hands.(Electric shock may occur.)Insert the power plug thoroughly.(If the power plug is not inserted securely, electricshock or fire due to overheating may occur.)• Do not use damaged plugs or loosen wall sockets.Be sure to stop operation whendisconnecting or connecting thepower plug.(May cause the fire due to damages of thesocket or blade of the power plug.)Periodically clean the power plug.(If dust builds up on the power plug, it mayabsorb moisture causing poor insulation, whichmay result in fire.)• Disconnect the power plug and wipe it with adry cloth.Do not do anything that may damagethe power cord or power plug.• Power cord must not be damaged, modified, bentexcessively, twisted or pulled. Also do not put near heatingappliances, or put anything heavy on. Do not bundle.(Short circuit may occur and cause electricshock or fire.)Please contact an authorized service center (as describedin the warranty) for a check or repair of the cord or plug.Do not use overloaded wallsocket or wiring equipment, anddo not use a power supply otherthan specification.(If the wall socket is overloaded, fire due tooverheating may occur.)Do not disassemble or modifythis product.(May cause injury, electric shock or fire due toabnormal operation.)Please contact an authorized service center(as described in the warranty) for repair.Do not insert any objects such aspin, wire and metal ones into theair inlet, outlet or any gaps.(Touching the inner part of the product maycause injury and electric shock.)Do not insert any flammablematerials (such as straw, etc.)into the air outlet of nozzle.(May cause a fire due to overheating.)Do not block theair inlet or outlet.(May cause a fire due tooverheating.)Do not let the product get wet.(Otherwise a fire and electricshock may be caused due toshort circuit.)In case of any problem or failurePower plugPower cord or power plugBodyAir inlet