Panasonic EX-F70 SERIES Ordering Manual

Also see for EX-F60 SERIES: Instruction manual Instruction manual Instruction manual

Contents

Panasonic EX-F70 SERIES Ordering Manual Manual pdf 3 page image

855 Leak Detection Sensor EX-F70 SERIES EX-F60 SERIESFIBERSENSORSLASERSENSORSPHOTO-ELECTRICSENSORSMICROPHOTO-ELECTRICSENSORSAREASENSORSLIGHTCURTAINSPRESSURE /FLOWSENSORSINDUCTIVEPROXIMITYSENSORSPARTICULARUSESENSORSSENSOROPTIONSSIMPLEWIRE-SAVINGUNITSWIRE-SAVINGSYSTEMSMEASURE-MENTSENSORSSTATICCONTROLDEVICESENDOSCOPELASERMARKERSPLC /TERMINALSHUMANMACHINEINTERFACESENERGYCONSUMPTIONVISUALIZATIONCOMPONENTSFACOMPONENTSMACHINEVISIONSYSTEMSUVCURINGSYSTEMSSelectionGuideWaferDetectionLiquid LeakDetectionLiquid LevelDetectionWaterDetectionColor MarkDetectionHot Melt GlueDetectionUltrasonicSmall / SlimObject DetectionObstacleDetectionOtherProductsSQ4EX-F70/EX-F60OPTIONSDesignation Model No. DescriptionUnit mounting bracket MS-DIN-3 Mounting bracket for EX-FC1Unit mounting bracket• MS-DIN-3• MS-SL-2Accessories• MS-EX-F7-1 • MS-EX-F7-2 • MS-EX-F6-1 • MS-EX-F6-2 • SL-CP1(Snap male connector)10 pcs. per set• SC-PK(Connector end caps)8 pcs. per set• MS-EX-F7-31 2 3 4Connector end capsSC-PKSPECIFICATIONSSensorsType General purpose Chemical-resistantSUS mounting bracket type PVC mounting bracket type PFA mounting bracket type PVC mounting bracket typeModel No.NPN output EX-F71 EX-F72 EX-F61 EX-F62Item PNP output EX-F71-PN EX-F72-PN EX-F61-PN EX-F62-PNSensing object Water, Fluorinert TM (Note 2, 3) Agent, such as Sulfuric acid, Hydrochloric acid,Phosphoric acid or Ammonia etc. (Note 2, 4, 6)Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or lessCurrent consumption 10 mA or less (PNP output type: 15 mA or less) 15 mA or lessOutputNPN open-collector transistor• Maximum sink current: 50 mA• Applied voltage: 30 V DC or less (between output and 0 V)• Residual voltage: 1.0 V or less (at 50 mA sink current)0.4 V or less (at 16 mA sink current)PNP open-collector transistor• Maximum source current: 50 mA• Applied voltage: 30 V DC or less (between output and +V)• Residual voltage: 1.0 V or less (at 50 mA source current)0.4 V or less (at 16 mA source current)Utilization category DC-12 or DC-13Output operation In normal state: ON, When leak detected or the sensor is mounted improperly: OFFShort-circuit protection IncorporatedResponse time 50 ms or lessFAULT indicator Red LED (lights up when the leak liquid is detected, or the sensor is mounted improperly)NORMAL indicator Green LED (lights up when the sensor is mounted properly)Pollution degree 3 (Industrial environment)Protection IP67 (IEC)Ambient temperature –10 to +60 °C +14 to +140 °F (No dew condensation or icing allowed), Storage: –20 to +70 °C – 4 to +158 °F (Note 5)Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RHAmbient illuminance Incandescent light: 1,000 ℓx at the light-receiving faceEmitting element Infrared LED (non-modulated)Material Enclosure: Polypropylene Enclosure: PFACable 0.1 mm2 3-core PVC cabtyre cable, 2 m 6.562 ft long 0.1 mm2 3-core PFA cabtyre cable, 3 m 9.843 ft longCable extension Extension up to total 50 m 164.042 ft is possible with 0.3 mm 2 , or more, cable.Weight Net weight: 25 g approx. Net weight: 60 g approx.AccessoriesMS-EX-F7-1(SUS mounting bracket)(Note 7): 1 pc.MS-EX-F7-2, MS-EX-F7-3(PVC mounting bracket) (Note 7):1 pc.each for two-point-fixing and adhesive-fixingMS-EX-F6-1(PFA mounting bracket): 1 pc.MS-EX-F6-2(PVC mounting bracket): 1 pc.Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F.2) Highly viscous liquid may not be detected stably.3) FluorinertTM is the world wide trademark of 3M.4) The agents mentioned above are examples. For details, please contact our office.5) Liquid being detected should also be kept within the rated ambient temperature range.6) PVC mounting bracket may not be used depending on type or viscosity etc. of the agent. For details, please contact our office.7) The mounting bracket for EX-F71(-PN) is not interchangeable with that of EX-F72(-PN) due to the different sensitivity settings of each sensor.SUS mountingbracketPVC mounting bracketfor adhesive fixingPFA mountingbracketPVC mountingbracketUnit mountingbasePVC mounting bracketfor two-point fixing