Menu
Panasonic ET-SCT100 Operating Instructions Manual
        | |
ENGLISH - 7Installation Procedure (How to Affi x) (continued)1) Use, for example, protection sheets and towelsas covers to prevent other than the installationarea from getting wet.2) Clean the glass using soapy water, a rubberwiper, and towels.3) Measure the glass size with a tape measure.4) Cut the film screen to the required size using aruler and cutter knife.5) Spray soapy water on the glass using a spraybottle.6) Spray soapy water on the adhesive surface whilepeeling off the release film of the film screen.z When the film screen to be affixed is large, thework should be performed by at least two persons.7) Affix the film screen to the glass.z Take care that air bubbles do not enter betweenthe film screen and glass at this time.8) Use a squeegee to push out the air bubbles andwater from the center toward the edges.Release filmSticker for identifyingsurface to affix to glassInstallation ProcedureThe installation procedure/method is equivalent to that used for ordinary glass film. |
Related manuals for Panasonic ET-SCT100
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved